With the development of electrical stimulation technology, traditional transcranial alternating current stimulation (tACS) technology has been found to have the drawback of not targeting a specific area accurately. Studies have shown that optimizing the number and position of electrodes during electrical stimulation has a very good effect on enhancing brain stimulation accuracy. At present, an increasing number of laboratories have begun to optimize tACS. However, there has been no study summarizing the optimization methods of tACS. Determining whether different optimization methods are effective and the optimization approach could provide information that could guide future tACS research. We describe the results of recent research on tACS optimization and integrate the optimization approaches of tACS in recent research. Optimization approaches can be classified into two groups: high-definition electrical stimulation and interference modulation electrical stimulation. The optimization methods can be divided into five categories: high-definition tACS, phase-shifted tACS, amplitude-modulated tACS, the temporally interfering (TI) method, and the intersectional short pulse (ISP) method. Finally, we summarize the latest research on hardware useful for tACS improvement and outline future directions.

No abstract

Abstract. The paper discusses the influence of different transmission line models on lightning protection performance of transmission line under different circumstances by studying the mathematical model and calculation method of transmission lines. And the paper uses EMTP method to compare the actual calculation results and the actual results. The measurement errors introduced in different transmission lines model under different conditions are calculated to determine which model is more concise and effective within acceptable error range. And these results provide a strong theoretical basis for lightning protection performance analysis of transmission lines.

No abstract