Comparison between phosphine and NHC-modified Pd catalysts in the telomerization of butadiene with methanol ndash a kinetic study combined with model-based experimental analysis, Chemical Engineering and Processing http://dx.doi.org/10. 1016/j.cep.2015.07.007 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.Comparison between phosphine and NHC-modified Pd catalysts in the telomerization of butadiene with methanol -a kinetic study combined with model-based experimental analysis The telomerization of butadiene with methanol was investigated in the presence of different palladium catalysts modified either with triphenylphosphine (TPP) or 1,3-dimesityl-imidazol-2-ylidene (IMes) ligand. When pure butadiene was used as substrate, a moderate selectivity for the Pd-TPP catalyst toward the desired product 1-methoxy-2,7-octadiene (1-Mode) of around 87 % was obtained, while the IMes carbene ligand almost exclusively formed 1-Mode with 97.5 % selectivity. The selectivity remained unchanged when the pure butadiene feed was replaced by synthetic crack-C 4 (sCC 4 ), a technical feed of 45 mol % butadiene and 55 mol % inerts (butenes and butanes). The TPP-modified catalyst showed a lower reaction rate, which was attributed to the expected dilution effect caused by the inerts. Surprisingly, the IMes-modified catalyst showed a higher rate with sCC 4 compared to the pure feed. By means of a model-based experimental analysis, kinetic rate equations could be derived. The kinetic modeling supports the assumption that the two catalyst systems follow different kinetic rate equations. For the Pd-TPP catalyst, the reaction kinetics were related to the Jolly mechanism. In contrast, the Jolly mechanism had to be adapted for the Pd-IMes catalyst as the impact of the base seems to differ strongly from that for the Pd-TPP catalyst. The Pd-IMes system was found to be zero order in butadiene at moderate to high butadiene concentrations and first order in base while the nucleophilicity of the base is influenced by the methanol amount resulting in a negative reaction order for methanol.

Comparison between phosphine and NHC-modified Pd catalysts in the telomerization of butadiene with methanol ndash a kinetic study combined with model-based experimental analysis, Chemical Engineering and Processing http://dx.doi.org/10. 1016/j.cep.2015.07.007 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain.Comparison between phosphine and NHC-modified Pd catalysts in the telomerization of butadiene with methanol -a kinetic study combined with model-based experimental analysis The telomerization of butadiene with methanol was investigated in the presence of different palladium catalysts modified either with triphenylphosphine (TPP) or 1,3-dimesityl-imidazol-2-ylidene (IMes) ligand. When pure butadiene was used as substrate, a moderate selectivity for the Pd-TPP catalyst toward the desired product 1-methoxy-2,7-octadiene (1-Mode) of around 87 % was obtained, while the IMes carbene ligand almost exclusively formed 1-Mode with 97.5 % selectivity. The selectivity remained unchanged when the pure butadiene feed was replaced by synthetic crack-C 4 (sCC 4 ), a technical feed of 45 mol % butadiene and 55 mol % inerts (butenes and butanes). The TPP-modified catalyst showed a lower reaction rate, which was attributed to the expected dilution effect caused by the inerts. Surprisingly, the IMes-modified catalyst showed a higher rate with sCC 4 compared to the pure feed. By means of a model-based experimental analysis, kinetic rate equations could be derived. The kinetic modeling supports the assumption that the two catalyst systems follow different kinetic rate equations. For the Pd-TPP catalyst, the reaction kinetics were related to the Jolly mechanism. In contrast, the Jolly mechanism had to be adapted for the Pd-IMes catalyst as the impact of the base seems to differ strongly from that for the Pd-TPP catalyst. The Pd-IMes system was found to be zero order in butadiene at moderate to high butadiene concentrations and first order in base while the nucleophilicity of the base is influenced by the methanol amount resulting in a negative reaction order for methanol.

No abstract