In this paper we describe the control approaches tested in the improved version of an existing soft robotic neck with two Degrees Of Freedom (DOF), able to achieve flexion, extension, and lateral bending movements similar to those of a human neck. The design is based on a cable-driven mechanism consisting of a spring acting as a cervical spine and three servomotor actuated tendons that let the neck to reach all desired postures. The prototype was manufactured using a 3D printer. Two control approaches are proposed and tested experimentally: a motor position approach using encoder feedback and a tip position approach using Inertial Measurement Unit (IMU) feedback, both applying fractional-order controllers. The platform operation is tested for different load configurations so that the robustness of the system can be checked.

The inspection platform that is described in this manuscript consists of a hexapod walking robot designed by the Centre for Automation and Robotics CSIC-UPM, Spain. This inspection platform will load a scanning manipulator arm which, in turn, carries a metal detector on its tool centre point. With the integration of both, hexapod robot and scanning manipulator, several test tasks about the search and localisation of antipersonnel mines will be carried out, within a controlled environment. The SCARA configuration of the hexapod robot legs will allow low energy consumption when the robot executes gaits on flat terrain or with reduced slope, due the decoupling of gravitational effects. This legged robot has a mass about 250 kg, and it can bear a high payload up to about 300 kg. Considering this load characteristic then the vibrational effects on the scanning manipulator will be reduced, when this carry out scanning tasks over the terrain.

This paper presents a proposal of a modular robot with origami structure. The proposal is based on a self-scalable and modular link made of soft parts. The kinematics of a single link and several links interconnected is studied and validated. Besides, the link has been prototyped, identified, and controlled in position. The experimental data show that the system meets the scalability requirements and that its response is totally reliable and robust.

Purpose The aim of this paper is to introduce a hexapod walking robot specifically designed for applications in humanitarian demining, intended to operate autonomously for several hours. To this end, the paper presents an experimental study for the evaluation of its energy efficiency. Design/methodology/approach First, the interest of using a walking robot for detection and localization of anti-personnel landmines is described, followed by the description of the mechanical system and the control architecture of the hexapod robot. Second, the energy efficiency of the hexapod robot is assessed to demonstrate its autonomy for performing humanitarian demining tasks. To achieve this, the power consumed by the robot is measured and logged, with a number of different payloads placed on-board (always including the scanning manipulator arm assembled on the robot front end), during the execution of a discontinuous gait on flat terrain. Findings The hexapod walking robot has demonstrated low energy consumption when it is carrying out several locomotion cycles with different loads on it, which is fundamental to have a desired autonomy. It should be considered that the robot has a mass of about 250 kg and that it has been loaded with additional masses of up to 170 kg during the experiments, with a consumption of mean power of 72 W, approximately. Originality/value This work provides insight on the use of a walking robot for humanitarian demining tasks, which has high stability and an autonomy of about 3 hours for a robot with high mass and high payload. In addition, the robot can be supervised and controlled remotely, which is an added value when it is working in the field.

Abstract. This work presents the reconfiguration from a previous climbing robot to an all-terrain robot for applications in outdoor environments. The original robot is a six-legged climbing robot for high payloads. This robot has used special electromagnetic feet in order to support itself on vertical ferromagnetic walls to carry out specific tasks. The reconfigured all-terrain hexapod robot will be able to perform different applications on the ground, for example, as inspection platform for humanitarian demining tasks. In this case, the reconfigured hexapod robot will load a scanning manipulator arm with a specific metal detector as end-effector. With the implementation of the scanning manipulator on the hexapod robot, several tasks about search and localisation of antipersonnel mines would be carried out. The robot legs have a SCARA configuration, which allows low energy consumption when the robot performs trajectories on a quasi-flat terrain.