Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

No abstract

Constraints of mechanical, thermal, and chemical properties are making ceramics the material choice for industrial and dental applications. The quality of a machined surface of ceramics is fundamentally dependent on the response of the material to the machining process. This paper presents a combined analytical and experimental study with focus on optimizing the machining performance of dental ceramics — DICOR/MGC — with three distinguished microstructures. The study starts from analyzing the microstructural characteristics to searching for the machining conditions that provide satisfactory performance in terms of acceptable flexural strength. Evidence gained from the cutting force measurements and evaluation of fracture strength degradation indicates that the control of micro-scale fracture formed on the machined surface, with microstructural characteristics being considered, is the key factor which dominates the machining performance.