DSM generation from satellite imagery is a long-lasting issue and it has been addressed in several ways over the years; however, expert and users are continuously searching for simpler but accurate and reliable software solutions. One of the latest ones is provided by the commercial software Agisoft Metashape (since version 1.6), previously known as Photoscan, which joins other already available open-source and commercial software tools. The present work aims to quantify the potential of the new Agisoft Metashape satellite processing module, considering that to the best knowledge of the authors, only two papers have been published, but none considering cross-sensor imagery. Here we investigated two different case studies to evaluate the accuracy of the generated DSMs. The first dataset consists of a triplet of Pléiades images acquired over the area of Trento and the Adige valley (Northern Italy), which is characterized by a great variety in terms of geomorphology, land uses and land covers. The second consists of a triplet composed of a WorldView-3 stereo pair and a GeoEye-1 image, acquired over the city of Matera (Southern Italy), one of the oldest settlements in the world, with the worldwide famous area of Sassi and a very rugged morphology in the surroundings. First, we carried out the accuracy assessment using the RPCs supplied by the satellite companies as part of the image metadata. Then, we refined the RPCs with an original independent terrain technique able to supply a new set of RPCs, using a set of GCPs adequately distributed across the regions of interest. The DSMs were generated both in a stereo and multi-view (triplet) configuration. We assessed the accuracy and completeness of these DSMs through a comparison with proper references, i.e., DSMs obtained through LiDAR technology. The impact of the RPC refinement on the DSM accuracy is high, ranging from 20 to 40% in terms of LE90. After the RPC refinement, we achieved an average overall LE90 <5.0 m (Trento) and <4.0 m (Matera) for the stereo configuration, and <5.5 m (Trento) and <4.5 m (Matera) for the multi-view (triplet) configuration, with an increase of completeness in the range 5–15% with respect to stereo pairs. Finally, we analyzed the impact of land cover on the accuracy of the generated DSMs; results for three classes (urban, agricultural, forest and semi-natural areas) are also supplied.

3D modelling of inscribed archaeological finds (such as tablets or small objects) has to consider issues related to the correct acquisition and reading of ancient inscriptions, whose size and degree of conservation may vary greatly, in order to guarantee the needed requirements for visual inspection and analysis of the signs. In this work, photogrammetry and laser scanning were tested in order to find the optimal sensors and settings, useful to the complete 3D reconstruction of such inscribed archaeological finds, paying specific attention to the final geometric accuracy and operative feasibility in terms of required sensors and necessary time. Several 3D modelling tests were thus carried out on four replicas of inscribed objects, which are characterized by different size, material and epigraphic peculiarities. Specifically, in relation to photogrammetry, different cameras and lenses were used and a robust acquisition setup, able to guarantee a correct and automatic alignment of images during the photogrammetric process, was identified. The focus stacking technique was also investigated. The Canon EOS 1200D camera equipped with prime lenses and iPad camera showed respectively the best and the worst accuracy. From an overall geometric point of view, 50 mm and 100 mm lenses achieved very similar results, but the reconstruction of the smallest details with the 50 mm lens was not appropriate. On the other hand, the acquisition time for the 50 mm lens was considerably lower than the 100 mm one. In relation to laser scanning, the ScanRider 1.2 model was used. The 3D models produced (in less time than using photogrammetry) clearly highlight how this scanner is able to reconstruct even the high frequencies with high resolution. However, the models in this case are not provided with texture. For these reasons, a robust procedure for integrating the texture of photogrammetry models with the mesh of laser scanning models was also carried out. * Corresponding author. provide a knowledge basis for the activities which will be carried out in conjuction with a specific strand of the ERC Consolidator project entitled INSCRIBE -'INvention of SCRIpts and their BEginnings', under the direction of Silvia Ferrara (University of Bologna) as PI (INSCRIBE, 2018a).

<p><strong>Abstract.</strong> DATE (Digital Automatic Terrain Extractor) is a Free and Open Source Software for Geospatial (FOSS4G), which combines photogrammetric and computer vision algorithms in order to automatically generate DSMs from multi-view SAR and optical high resolution satellite imagery, following an iterative and pyramidal workflow in order to refine a coarse DSM used as reference. Consequently, DATE is able to face both the issues of DSM generation and epipolar resampling of satellite imagery. The aim of this work is to evaluate DATE performance, by carrying out a sensitivity analysis based on the dense matching parameters. In particular, DATE implements the Semi-Global Block Matching (SGBM) algorithm, a modified version of Semi-Global Matching method: thus, the sensitivity analysis aims at assessing how SGBM parameters &amp;ndash; namely, the difference between maximum and minimum disparity (<i>ndisparities</i>), the minimum disparity value (<i>minimumDisp</i>) and the matched block size (<i>SADWindowSize</i>) &amp;ndash; affect the efficiency of the disparity map computation and the final DSM accuracy. The analysis focuses on the case study of Trento and of the Adige Valley, which was chosen due to its geomorphological heterogeneity and complexity, allowing to perform an accuracy evaluation on four tiles, characterized by specific roughness frequencies and morphologies (thus having different effects on disparity variations). Several practical indications on the optimal and critical parameter combinations were retrieved; in addition to this, this work highlighted the most influential parameters both in terms of accuracy (<i>minimumDisp</i>) and computation time (<i>ndisparities</i>), paving the way to further principal component analyses. Finally, the obtained results showed no clear relationship between the area morphology and the solution structure.</p>