We demonstrate the use of polyethylene devices (PEDs) for assessing hydrophobic organic compounds (HOCs) in aquatic environments. Like semipermeable membrane devices (SPMDs) and solid-phase microextraction (SPME), PEDs passively accumulate HOCs in proportion to their freely dissolved concentrations. Polyethylene-water partition constants (K(PEW)S) were measured in the laboratory for eight polycyclic aromatic hydrocarbons (PAHs), five polychlorinated biphenyls (PCBs), and one polychlorinated dibenzop-dioxin (PCDD), and these were found to correlate with octanol-water partition constants (K(OW)s; log K(PEW) = 1.13 log K(OW) - 0.86, R2 = 0.89). Temperature and salinity dependencies of K(PEW) values for the HOCs tested were well predicted with excess enthalpies of solution in water and Setschenow constants, respectively. We also showed that standards, impregnated in the PED before deployment, can be used to correct for incomplete equilibrations. Using PEDs, we measured phenanthrene and pyrene at ng/L concentrations and 2,2',5,5'-tetrachlorobiphenyl at pg/L concentrations in Boston Harbor seawater, consistent with our findings using traditional procedures. PEDs are cheap and robust samplers, competent to accomplish in situ, time-averaged passive sampling with fast equilibration times (approximately days) and simplified laboratory analyses.

Hundreds of organic chemicals are used during natural gas extraction via high-volume hydraulic fracturing (HVHF). However, it is unclear whether these chemicals, injected into deep shale horizons, reach shallow groundwater aquifers and affect local water quality, either from those deep HVHF injection sites or from the surface or shallow subsurface. Here, we report detectable levels of organic compounds in shallow groundwater samples from private residential wells overlying the Marcellus Shale in northeastern Pennsylvania. Analyses of purgeable and extractable organic compounds from 64 groundwater samples revealed trace levels of volatile organic compounds, well below the Environmental Protection Agency's maximum contaminant levels, and low levels of both gasoline range (0-8 ppb) and diesel range organic compounds (DRO; 0-157 ppb). A compound-specific analysis revealed the presence of bis(2-ethylhexyl) phthalate, which is a disclosed HVHF additive, that was notably absent in a representative geogenic water sample and field blanks. Pairing these analyses with (i) inorganic chemical fingerprinting of deep saline groundwater, (ii) characteristic noble gas isotopes, and (iii) spatial relationships between active shale gas extraction wells and wells with disclosed environmental health and safety violations, we differentiate between a chemical signature associated with naturally occurring saline groundwater and one associated with alternative anthropogenic routes from the surface (e.g., accidental spills or leaks). The data support a transport mechanism of DRO to groundwater via accidental release of fracturing fluid chemicals derived from the surface rather than subsurface flow of these fluids from the underlying shale formation.natural gas extraction | high-volume hydraulic fracturing | groundwater | hydrophobic organic contaminants | transport mechanisms

To assess hydrophobic organic chemical (HOC) contamination in sediments, a method was developed using polyethylene (PE) passive samplers inserted directly in the intact sediment beds to measure freely dissolved HOC concentrations. Performance reference compounds (PRCs: d10-phenanthrene, d10-pyrene, and d12-chrysene), impregnated into the PE before use, allowed porewater concentrations to be deduced after exposure times much shorter than would be required for sampler equilibration (days instead of months). Three diverse sediments were used in the laboratory, and PE-deduced porewater concentrations of six native PAHs (phenanthrene, anthracene, fluoranthene, pyrene, benz(a)anthracene, and chrysene) matched results from air-bridge testing and from direct porewater extractions after correcting for colloid effects. PE strips, deployed from a boat in Boston Harbor, yielded concentrations that were like those measured in porewaters from a sediment core collected nearby. Notably, equilibrium partitioning (EqP) estimates were always much higher (up to 100x) than those measured using the other methods, suggesting the large inaccuracy of that approach. Hence, PE passive sampling appears to greatly improve the accuracy of assessing the hazards posed by compounds like PAHs in sediment beds.

Polymeric passive samplers are useful for assessing hydrophobic organic chemical contamination in sediment beds. Here, an improved method is described for measuring concentrations of contaminants in porewater by using performance reference compounds (deuterated phenanthrene, pyrene, and chrysene) to calibrate sampler/site-specific mass transfer behavior. The method employs a one-dimensional diffusion model of chemical exchange between a polymer sheet of finite thickness and an unmixed sediment bed. The model is parametrized by diffusivities and partition coefficients for both the sampler and sediment. This method was applied to estimate porewater concentrations for seventeen PAHs from polymeric samplers deployed for 3-10 days in homogenized sediment from a coal-tar contaminated site. The accuracy of the method was verified by comparing the passive sampler results to concentrations measured through liquid-liquid extraction of physically separated porewaters, with corrections for sorption to colloidal organic carbon. The measurements made using the two methods matched within about a factor of 2.0 (+/-0.9) for the 17 target PAHs.