Infrared (IR) imaging has become a viable tool for visualizing various chemical bonds in a specimen. The performance, however, is limited in terms of spatial resolution and imaging speed. Here, instead of measuring the loss of the IR beam, we use a pulsed visible light for high-throughput, widefield sensing of the transient photothermal effect induced by absorption of single mid-IR pulses. To extract these transient signals, we built a virtual lock-in camera synchronized to the visible probe and IR light pulses with precisely controlled delays, allowing submicrosecond temporal resolution determined by the probe pulse width. Our widefield photothermal sensing microscope enabled chemical imaging at a speed up to 1250 frames/s, with high spectral fidelity, while offering submicrometer spatial resolution. With the capability of imaging living cells and nanometer-scale polymer films, widefield photothermal microscopy opens a new way for high-throughput characterization of biological and material specimens.

Thienoisoindigo-based semiconducting polymer with a strong near-infrared absorbance is synthesized and its water-dispersed nanoparticles (TSPNs) are investigated as a contrast agent for photoacoustic (PA) imaging in the second near-infrared (NIR-II) window (1000-1350 nm). The TSPNs generate a strong PA signal in the NIR-II optical window, where background signals from endogenous contrast agents, including blood and lipid, are at the local minima. By embedding a TSPN-containing tube in chicken-breast tissue, an imaging depth of more than 5 cm at 1064 nm excitation is achieved with a contrast-agent concentration as low as 40 µg mL . The TSPNs under the skin or in the tumor are clearly visualized at 1100 and 1300 nm, with negligible interference from the tissue background. TSPN as a PA contrast in the NIR-II window opens new opportunities for biomedical imaging of deep tissues with improved contrast.

Phase-contrast microscopy converts the phase shift of light passing through a transparent specimen, e.g., a biological cell, into brightness variations in an image. This ability to observe structures without destructive fixation or staining has been widely utilized for applications in materials and life sciences. Despite these advantages, phase-contrast microscopy lacks the ability to reveal molecular information. To address this gap, we developed a bond-selective transient phase (BSTP) imaging technique that excites molecular vibrations by infrared light, resulting in a transient change in phase shift that can be detected by a diffraction phase microscope. By developing a time-gated pump–probe camera system, we demonstrate BSTP imaging of live cells at a 50 Hz frame rate with high spectral fidelity, sub-microsecond temporal resolution, and sub-micron spatial resolution. Our approach paves a new way for spectroscopic imaging investigation in biology and materials science.

Low-intensity ultrasound is an emerging modality for neuromodulation. Yet, transcranial neuromodulation using low-frequency piezo-based transducers offers poor spatial confinement of excitation volume, often bigger than a few millimeters in diameter. In addition, the bulky size limits their implementation in a wearable setting and prevents integration with other experimental modalities. Here, we report spatially confined optoacoustic neural stimulation through a miniaturized Fiber-Optoacoustic Converter (FOC). The FOC has a diameter of 600 μm and generates omnidirectional ultrasound wave locally at the fiber tip through the optoacoustic effect. We show that the acoustic wave generated by FOC can directly activate individual cultured neurons and generate intracellular Ca 2+ transients. The FOC activates neurons within a radius of 500 μm around the fiber tip, delivering superior spatial resolution over conventional piezo-based low-frequency transducers. Finally, we demonstrate direct and spatially confined neural stimulation of mouse brain and modulation of motor activity in vivo.

Transformation optics has made a major contribution to the advancement of modern electromagnetism and related research assisted by the development of metamaterials. In this work, we applied this concept to the thermodynamics using the coordinate transformation to the time-dependent heat diffusion equation to manipulate the heat flux by predefined diffusion paths. Experimentally, we demonstrated a transient thermal cloaking device engineered with effective thermal materials and successfully hid a centimeter-sized vacuum cavity. A rescaled heat equation accounting for all the pertinent parameters of various ingredient materials was proposed to greatly facilitate the fabrication. Our results unambiguously demonstrate the practical possibility of implementing complex transformed thermal media with high accuracy and acquiring several unprecedented thermodynamic functions, which we believe will help to broaden the current research and pave a new path to manipulate heat for novel device applications.