No abstract

Proximal sensing of soil electromagnetic properties is widely used to map spatial land heterogeneity. The mapping instruments use galvanic contact, capacitive coupling or electromagnetic induction. Regardless of the type of instrument, the geometrical configuration between signal transmitting and receiving elements typically defines the shape of the depth response function. To assess vertical soil profiles, many modern instruments use multiple transmitter-receiver pairs. Alternatively, vertical electrical sounding can be used to measure changes in apparent soil electrical conductivity with depth at a specific location. This paper examines the possibility for the assessment of soil profiles using a dynamic surface galvanic contact resistivity scanning approach, with transmitting and receiving electrodes configured in an equatorial dipole-dipole array. An automated scanner system was developed and tested in agricultural fields with different soil profiles. While operating in the field, the distance between current injecting and measuring pairs of rolling electrodes was varied continuously from 40 to 190 cm. The preliminary evaluation included a comparison of scan results from 20 locations to shallow (less than 1.2 m deep) soil profiles and to a two-layer soil profile model defined using an electromagnetic induction instrument.

It is a non-destructive and real-time method to detect the soil nutrient content by using spectroscopy analysis technology. In order to isolate the effective spectral for TN content from the soil spectra effectively, the NIR model predicting TN was developed based on wavelet packet analysis. 100 soil samples were collected for calibration and validation from the field. First, using the high-precision NIR detecting instrument to scan the target and obtaining the continuous spectra of soil samples in the laboratory. Secondly, with three different orthogonal wavelets (bior4.4, db4, sym4) as the generating functions, the original signal of each soil sample was decomposed and reconstructed based on the respective wavelet packet. Then the multiple linear regression (MLR) models for TN were established based on each drawn characteristic spectrum. Finally, three models were compared and analyzed, and the model with the highest forecasting accuracy was obtained based on db4, which determined R 2 reached 0.904. The research concluded that wavelet packet analysis could eliminate or substantially reduce the factors outside the parameters to the spectrum directly or indirectly, and the obstacles in establishing linear models for soil parameters were removed. It is feasible and potential to the real-time prediction of TN content.

Proximal sensing of soil electromagnetic properties is widely used to map spatial land heterogeneity. The mapping instruments use galvanic contact, capacitive coupling or electromagnetic induction. Regardless of the type of instrument, the geometrical configuration between signal transmitting and receiving elements typically defines the shape of the depth response function. To assess vertical soil profiles, many modern instruments use multiple transmitter-receiver pairs. Alternatively, vertical electrical sounding can be used to measure changes in apparent soil electrical conductivity with depth at a specific location. This paper examines the possibility for the assessment of soil profiles using a dynamic surface galvanic contact resistivity scanning approach, with transmitting and receiving electrodes configured in an equatorial dipole-dipole array. An automated scanner system was developed and tested in agricultural fields with different soil profiles. While operating in the field, the distance between current injecting and measuring pairs of rolling electrodes was varied continuously from 40 to 190 cm. The preliminary evaluation included a comparison of scan results from 20 locations to shallow (less than 1.2 m deep) soil profiles and to a two-layer soil profile model defined using an electromagnetic induction instrument.

In an agricultural field, monitoring the temporal changes in soil conditions can be as important as understanding spatial heterogeneity when it comes to determining the locally-optimized application rates of key agricultural inputs. For example, the monitoring of soil water content is needed to decide on the amount and timing of irrigation. On-the-go soil sensing technology provides a way to rapidly obtain high-resolution, multiple data layers to reveal soil spatial variability, at a relatively low cost. To take advantage of this information, it is important to define the locations, which represent diversified field conditions, in terms of their potential to store and release soil water. Choosing the proper locations and the number of soil monitoring sites is not straightforward. In this project, sensor-based maps of soil apparent electrical conductivity and field elevation were produced for seven agricultural fields in Nebraska, USA. In one of these fields, an eight-node wireless sensor network was used to establish real-time relationships between these maps and the Water Stress Potential (WSP) estimated using soil matric potential measurements. The results were used to model hypothetical WSP maps in the remaining fields. Different placement schemes for temporal soil monitoring sites were evaluated in terms of their ability to predict the hypothetical WSP maps with a different range and magnitude of spatial variability. When a large number of monitoring sites were used, it was shown that the probability for uncertain model predictions was relatively low regardless of the site selection strategy. However, a small number of monitoring sites may be used to reveal the underlying relationship only if these locations are chosen carefully.