A method was validated for the determination of total Hg in fish muscle using continuous flow cold vapour atomic absorption (CVAAS) after microwave digestion in closed vessels. The method was validated according to European Union Regulations 333/2007 and 657/2002, considering the maximum level for the metal in fish, established by European Union regulation 1881/2006. The procedure for determining linear range, selectivity, recovery, precision, trueness, decision limit (CCα), detection capability (CCβ), measurement uncertainty and robustness of the method is reported. The results of the validation process demonstrate the method fulfils the provisions of the Commission Regulation. The selectivity study indicated that there was no matrix effect on the calibration curve between the concentration range of 1.0 and 30.0 µg Hg l(-1). The mean recovery calculated at six levels of fortification was in the range of 94-104%. The limit of detection (LOD) and limit of quantification (LOQ) values were 4.90 and 15.7 µg kg(-1), while the CCα and CCβ values were 0.517 and 0.533 mg kg(-1), respectively, for the maximum contaminant level of 0.500 mg kg(-1). The relative expanded measurement uncertainty of the method was 0.055 mg kg(-1). The method was not affected by slight variations of some critical factors (ruggedness minor changes) as sample mass and volume of the HNO(3) and H(2)O(2) used in the digestion step. The method allowed accurate confirmation analyses of the CRM DORM 3. In fact, the Z-scores attained in a proficiency test round were well below the reference value of 2.0, proving the excellent performance of the laboratory.

No abstract

Nowadays, UV filters are considered emerging contaminants, once they are present in environment due to anthropic action, and they can also be harmful to human health and environment. So, in order to analyze the presence of these target compounds in water, this work describes the development of a sensitive method for the determination of five UV filters in water samples using solid phase extraction (SPE) followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS).