A road tunnel is an enclosed and covered infrastructure for the vehicular traffic. Its lighting system provides 24 h of artificial sources only, with a higher amount of electric power used during the day. Due to safety reasons, when there is natural lighting outside the tunnel, the lighting levels in the stretches right after the entrance and before the exit must be high, in order to guide the driver's eye towards the middle of the tunnel where the luminance must guarantee safe driving, avoid any over-dimensioning of the lighting systems, and produce energy savings. Such effects can be reached not only through the technological advances in the field of artificial lighting sources with high luminous efficiency, but also through new materials for road paving characterized by a higher reflection coefficient than other ordinary asphalts. This case study examines different technical scenarios, analyzing and comparing possible energy and economic savings. Traditional solutions are thus compared with scenarios suggesting the solutions previously mentioned. Special asphalts are interesting from an economic point of view, whereas the high costs of LED sources nowadays represent an obstacle for their implementation. OPEN ACCESSSustainability 2015, 7 9665

Abstract:The goal set by the EU of quasi-zero energy buildings is not easy to reach for a country like Italy, as it holds a wide number of UNESCO sites and most of them are entire historical old towns. This paper focuses on the problem of the improvement of energy performance of historical Italian architecture through simple interventions that respect the building without changing its shape and structure. The work starts from an energy analysis of a building located in the historic center of Tivoli, a town close to Rome. The analysis follows the recommendations of the UNI TS 11300-Part1, which indicates how to evaluate the energy consumptions. The calculations were performed only on the building envelope, based on passive solutions and alternatives. Four passive strategies were examined and applied based on the location of the building and the non-alteration of the structure and the landscape. The obtained results impacted positively on the energy performance of the building: the annual energy saving reached a maximum value of 25%. This work shows how it is possible to improve the energy performance of an existing building achieving a significant energy saving with the respect of the building architecture, shape, function and the surrounding landscape.

Abstract:The European Union is working on strategies in order to increase the energy efficiency of buildings. A useful solution is to identify the energy performance of buildings through the Energy Performance Certificate (EPC), as it provides information for the comparison of buildings with different architectural typology, shape, design technology and geographic location. However, this tool does not assess the real energy consumption of the building and does not always take into account its impact on the environment. In this work, two different types of analysis were carried out: one based only on the energy efficiency and the other one based on the environmental impact. Those analyses were applied on a standard building, set in three different Italian locations, with the purpose of obtaining cross-related information. After the evaluation of the results, interventions on some parameters (walls insulation, windows frame, filler gas in the insulated glazing) have been identified in order to improve the energy behavior of the building with an acceptable environmental impact. The aim of this paper is to propose a methodology that integrates the EPC with green building rating systems, leading to a more conscious choice of retrofit interventions as a compromise between energy performances and environmental impact. OPEN ACCESSSustainability 2015, 7 10325

Abstract:The smart and resilient city evolves by slow procedures of mutation without radical changes, increasing the livability of its territory. The value of the city center in a Smart City can increase through urban lighting systems: its elements on the territory can collect and convey data to increase services to city users; the electrical system becomes the so-called Smart Grid. This paper presents a study of smart lighting for a small town, a touristic location inside a nature reserve on the Italian coast. Three different approaches have been proposed, from minimal to more invasive interventions, and their effect on the territory has been investigated. Based on street typology and its surroundings, the work analyzes the opportunity to introduce smart and useful services for the citizens starting from a retrofitting intervention. Smart city capabilities are examined, showing how it is possible to provide new services to the cities through ICT (Information and Communication Technology) without deep changes and simplifying the control of basic city functions. The results evidence an important impact on annual energy costs, suggesting smart grid planning not only for metropolis applications, but also in smaller towns, such as the examined one.