International audienceBiobased diepoxy synthons derived from isoeugenol, eugenol or resorcinol (DGE-isoEu, DGE-Eu and DGER, respectively) have been used as epoxy monomers in replacement of the diglycidyl ether of bisphenol A (DGEBA). Their curing with six different biobased anhydride hardeners leads to fully biobased epoxy thermosets. These materials exhibit interesting thermal and mechanical properties comparable to those obtained with conventional petrosourced DGEBA-based epoxy resins cured in similar conditions. In particular, a high Tg in the range of 90–130 °C and instantaneous moduli higher than 4.3 GPa have been recorded. These good performances are very encouraging, making these new fully biobased epoxy thermosets compatible with the usual structural application of epoxy materials

International audienceAn effective preparation of new tailor-made macromolecular materials via a combination of two (atom-efficient) catalytic transformations is reported. First, new aliphatic polyesters with alternated composition have been prepared using a salen aluminum catalyst system. Next, the pendant vinyl moieties in those copolymers have been selectively transformed into various functional groups by metathesis in the presence of homogeneous Grubbs catalysts. The latter metathesis reaction has been optimized in terms of catalytic activity and selectivity, to define the conditions for an effective and safe procedure that does not affect the macromolecular architecture. All polymer materials have been analyzed by H-1, and C-13 NMR spectroscopy, to diagnose the catalyst selectivities in the copolymerization and metathesis processes