No abstract

No abstract

The investigation for natural fibers composites in terms of performance, durability, and environmental impact for structural applications in marine environments is a relevant challenge in scientific and industrial field. On this context, the aim of this work is to assess the durability and mechanical stability in severe environment of epoxy/glass–flax hybrid composites. For the sake of comparison, also full flax and glass epoxy composites were investigated. All samples were exposed to salt–fog environmental conditions up to 60 aging days. Wettability behavior during time was compared with water uptake evolution to assess water sensitivity of hybrid composite configurations. Moreover, quasi‐static flexural and dynamic mechanical analysis were carried to evaluate as aging conditions, laminate configuration influence the surface and mechanical performances stability of the hybrid composites. The addition of glass fibers on flax laminate allows to enhance both flexural strength by 90%, and modulus by 128%, even if these properties are lower than those of full glass laminates. The results evidenced that the hybridization of flax fibers with glass ones is a practical approach to enhance the aging durability of epoxy/flax composite laminates in marine environmental conditions, obtaining a suitable compromise among environmental impact, mechanical properties, aging resistance, and costs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47203.

No abstract

The anticorrosive properties of a silanezeolite composite coating applied on a 6061 aluminum substrate was investigated. The composite film, deposited by dip-coating technique, was prepared with different contents of SAPO34 powder (60-90 wt%) with the purpose of evaluating the protective action offered by the zeolite-filled silane matrix. Corrosion protection performance, during immersion in 3.5% NaCl solution, was evaluated by means of a potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS). The coating evidenced good barrier properties and high hydrophobicity. The addition of zeolite in the silane matrix induced, as expected, a reduction of cathodic and anodic current. The zeolite improved the barrier properties of the hybrid sol-gel films, enhancing the resistance to localized corrosion attacks. Better results were observed for the sample with 80 wt% of zeolite filler that evidenced still acceptable protective action after 3 days of immersion in the sodium chloride solution.