Some of the most severe structural loadings come in the form of blast loads, which may be caused by severe accidents or even terrorist activities. Most commonly after exposure to explosive forces, a structure will suffer from different degrees of damage, and even progress towards a state of collapse. Therefore, damage detection of a structure subject to explosive loads is of importance. This paper proposes a new approach to damage detection of a concrete column structure subjected to blast loads using embedded piezoceramic smart aggregates (SAs). Since the sensors are embedded in the structure, the proposed active-sensing based approach is more sensitive to internal or through cracks than surface damage. In the active sensing approach, the embedded SAs act as actuators and sensors, that can respectively generate and detect stress waves. If the stress wave propagates across a crack, the energy of the wave attenuates, and the reduction of the energy compared to the healthy baseline is indicative of a damage. With a damage index matrix constructed by signals obtained from an array of SAs, cracks caused by blast loads can be detected throughout the structure. Conventional sensing methods such as the measurement of dynamic strain and acceleration were included in the experiment. Since columns are critical elements needed to prevent structural collapse, knowledge of their integrity and damage conditions is essential for safety after exposure to blast loads. In this research, a concrete column with embedded SAs was chosen as the specimen, and a series of explosive tests were conducted on the column. Experimental results reveal that surface damages, though appear severe, cause minor changes in the damage index, and through cracks result in significant increase of the damage index, demonstrating the effectiveness of the active sensing, enabled by embedded SAs, in damage monitoring of the column under blast loads, and thus providing a reliable indication of structural integrity in the event of blast loads.

Purpose The purpose of this paper is to investigate the explosive performance and explosion damage mechanism of T-beam bridge structure. Design/methodology/approach On the basis of the existing specification, two T-beam bridge models were designed and fabricated. Test specimens of different explosive dosage and different blast height were carried out. The mechanical process, failure mode, blast damage model, damage identification mechanism and blast evolution law and quantitative evaluation were taken into account. Findings The results revealed that the web plate fracture failure is the key to the unstable failure of the whole T-beam bridge. The explosion failure phenomenon and blast damage evaluation criterion of RC T-beam bridge was divided into five stages: the original cracks stage of concrete material (D = 0 ∼ 0.1), the fractures initiation stage of concrete material (D = 0.1 ∼ 0.3), the stable expansion stage of cracks in concrete material (D = 0.3 ∼ 0.55), the unstable expansion stage of cracks in concrete material (D = 0.55 ∼ 0.8), the explosion fracture of steel bars and the overall instability and damage of the bridge (D = 0.8 ∼ 1.0), which can also be described as basically intact, slight damage, moderate damage, severe damage and collapsed. Social implications The research result will provide basis for the antiknock evaluation and damage repair technical specifications of the RC T-beam bridge. Originality/value The research results of damage evaluation serve as a basis for damage repair and reinforcement of bridge structures after explosion.

No abstract

No abstract