A Ge-stabilized tetragonal ZrO2 dielectric with a permittivity (κ) value of 36.5 has been obtained by annealing a ZrO2/Ge/ZrO2 laminate at 500 °C and it is a more reliable approach toward stabilizing a tetragonal ZrO2 film. However, metal-insulator-metal (MIM) capacitors with the sole tetragonal ZrO2 film as an insulator achieve a high capacitance density of 27.8 fF/μm2 at the price of a degraded quadratic voltage coefficient of capacitance (VCC) of 81 129 ppm/V2 and unacceptably high leakage current. By capping an amorphous La-doped ZrO2 layer with a κ value of 26.3 to block grain boundaries-induced leakage paths of the crystalline ZrO2 dielectric, high-performance MIM capacitors in terms of a capacitance density of 19.8 fF/μm2, a VCC of 3135 ppm/V2, leakage current of 6.5×10−8 A/cm2 at −1 V, as well as a satisfactory capacitance change of 1.21% after ten-year operation can be realized.

Articles you may be interested inImprovement in the leakage current characteristic of metal-insulator-metal capacitor by adopting RuO2 film as bottom electrode Appl. Phys. Lett. 99, 022901 (2011); 10.1063/1.3609875 Reliability of Al 2 O 3 -doped ZrO 2 high-k dielectrics in three-dimensional stacked metal-insulator-metal capacitors Impact of crystallization behavior of Sr x Ti y O z films on electrical properties of metal-insulator-metal capacitors with TiN electrodes Appl. Phys. Lett. 97, 162906 (2010); 10.1063/1.3505323 Metal-insulator-metal capacitor with high capacitance density and low leakage current using ZrTiO 4 film Appl. Phys. Lett. 95, 113502 (2009); 10.1063/1.3222895 High density metal-insulator-metal capacitor based on Zr O 2 ∕ Al 2 O 3 ∕ Zr O 2 laminate dielectric Appl. Phys. Lett. 93, 033511 (2008);