The immediate bonding effectiveness of contemporary adhesives is quite favorable, regardless of the approach used. In the long term, the bonding effectiveness of some adhesives drops dramatically, whereas the bond strengths of other adhesives are more stable. This review examines the fundamental processes that cause the adhesion of biomaterials to enamel and dentin to degrade with time. Non-carious class V clinical trials remain the ultimate test method for the assessment of bonding effectiveness, but in addition to being high-cost, they are time- and labor-consuming, and they provide little information on the true cause of clinical failure. Therefore, several laboratory protocols were developed to predict bond durability. This paper critically appraises methodologies that focus on chemical degradation patterns of hydrolysis and elution of interface components, as well as mechanically oriented test set-ups, such as fatigue and fracture toughness measurements. A correlation of in vitro and in vivo data revealed that, currently, the most validated method to assess adhesion durability involves aging of micro-specimens of biomaterials bonded to either enamel or dentin. After about 3 months, all classes of adhesives exhibited mechanical and morphological evidence of degradation that resembles in vivo aging effects. A comparison of contemporary adhesives revealed that the three-step etch-and-rinse adhesives remain the ‘gold standard’ in terms of durability. Any kind of simplification in the clinical application procedure results in loss of bonding effectiveness. Only the two-step self-etch adhesives approach the gold standard and do have some additional clinical benefits.

Cross-sections of resin-dentin interfaces were etched with an argon-ion beam to make their substructure detectable by scanning electron microscopy. The dentin adhesive systems were categorized morphologically into three groups, and an attempt was made to clarify their adhesive mechanism. The first group of products removed the smear layer. The argon-ion bombardment clearly disclosed a hybrid or resin-impregnated dentin layer. It is hypothesized that conditioning with acidic or chelating agents demineralized the dentin surface-layer to a certain depth, leaving behind a collagen-rich mesh-work. Hydrophilic monomers are then believed to alter this collagen-fiber arrangement in a way that facilitates penetration of the adhesive resin, resulting in a mechanical, intermingled link between collagen and the adhesive resin. The second group preserved the smear layer. In this case, the dentinal tubules were obliterated with globular particles at their orifices and remained patent underneath these smear plugs. This type of adhesive system aims at the incorporation of the smear layer into the hydrophilic monomers, which have an affinity for the organic and/or inorganic components of the underlying dentin. Finally, a third, small group only partly dissolved the smear layer, creating a thin resin-impregnated dentin layer and a resin-impregnated smear plug. This study clearly showed that the application of recent adhesive systems induced structural changes in the dentin surface morphology, creating a retentive interface, called the inter-diffusion zone, between the deep, untouched dentin layers and the composite filling material. This resin-dentin interdiffusion zone offers bonding sites for copolymerization with the resin composite and, concurrently, might have protective potential for the pulp tissues.

In this study, a custom-made device turned out to be more effective than a thermoplastic device in the treatment of SDB. Our results suggest that the thermoplastic device cannot be recommended as a therapeutic option nor can it be used as a screening tool to find good candidates for mandibular advancement therapy.

The hardness and Young's modulus of the successive layers across a resin-dentin bonding area were determined by nano-indentation for four commercially-available dentin adhesive systems, of which two were also applied with a different conditioning agent. With a computer-controlled nano-indentation technique, minute triangular indentations were made within a small area of a few micrometers' diameter at a load of a few milli-Newtons. The load and displacement of the indenter were continuously monitored during the loading-unloading sequence, so hardness and Young's modulus could be computed as a function of the indenter geometry and the applied load. The hardness of the resin-dentin interdiffusion zone was significantly lower than that of unaltered dentin. A gradient of moduli of elasticity was observed from the rather stiff dentin over a more elastic resin-dentin interdiffusion zone and adhesive resin layer to the restorative composite. That gradient was more substantial in those systems that produced relatively thick adhesive resin layers or supplementally provided a filled low-viscosity resin as an intermediate layer between the adhesive resin and the bulk restorative composite. Such an elastic bonding area might have a strain capacity sufficient to relieve stresses between the shrinking composite restoration and the rigid dentin substrate, thereby improving the conservation of the dentin bond and, as a consequence, the marginal integrity and retention of the restoration.