Nanowires are conventionally assumed to grow via the vapor-liquid-solid process, in which material from the vapor is incorporated into the growing nanowire via a liquid catalyst, commonly a low-melting point eutectic alloy. However, nanowires have been observed to grow below the eutectic temperature, and the state of the catalyst remains controversial. Using in situ microscopy, we showed that, for the classic Ge/Au system, nanowire growth can occur below the eutectic temperature with either liquid or solid catalysts at the same temperature. We found, unexpectedly, that the catalyst state depends on the growth pressure and thermal history. We suggest that these phenomena may be due to kinetic enrichment of the eutectic alloy composition and expect these results to be relevant for other nanowire systems.

The recent demonstration of single-crystal organic optoelectronic devices has received widespread attention. But practical applications of such devices require the use of inexpensive organic films deposited on a wide variety of substrates. Unfortunately, the physical properties of these organic thin films do not compare favourably to those of single-crystal materials. Moreover, the basic physical principles governing organic thin-film growth and crystallization are not well understood. Here we report an in situ study of the evolution of pentacene thin films, utilizing the real-time imaging capabilities of photoelectron emission microscopy. By a combination of careful substrate preparation and surface energy control, we succeed in growing thin films with single-crystal grain sizes approaching 0.1 millimetre (a factor of 20-100 larger than previously achieved), which are large enough to fully contain a complete device. We find that organic thin-film growth closely mimics epitaxial growth of inorganic materials, and we expect that strategies and concepts developed for these inorganic systems will provide guidance for the further development and optimization of molecular thin-film devices.

No abstract

SummaryControlled formation of non-equilibrium crystal structures is one of the most important challenges in crystal growth. Catalytically-grown nanowires provide an ideal system for studying the fundamental physics of phase selection, while also offering the potential for novel electronic applications based on crystal polytype engineering. Here we image GaAs nanowires during growth as they are switched between polytypes by varying growth conditions. We find striking differences between the growth dynamics of the polytypes, including differences in interface morphology, step flow, and catalyst geometry. We explain the differences, and the phase selection, through a model that relates the catalyst volume, contact angle at the trijunction, and nucleation site of each new layer. This allows us to predict the conditions under which each phase should be preferred, and use these predictions to design GaAs heterostructures. We suggest that these results may apply to phase selection in other nanowire systems.

We observe in situ the vapor-liquid-solid (VLS) growth of Si nanowires, in UHV-CVD using Au catalyst. The nanowire sidewalls exhibit periodic sawtooth faceting, reflecting an oscillatory growth process. We interpret the facet alternation as resulting from the interplay of the geometry and surface energies of the wire and liquid droplet. Such faceting may be present in any VLS growth system in which there are no stable orientations parallel to the growth direction. The sawtooth structure has important implications for electronic mobility and scattering in nanowire devices.