No abstract

The toroidal field coils in Tore Supra are supra-conducting, and their number is restricted to 18. As a result, the ripple is fairly large, about 7% at the plasma boundary. Tore Supra has consequently been equipped with dedicated ripple loss diagnostics, which has allowed ripple loss studies. This paper reports on the measurements made with these diagnostics and provides an analysis of the experimental results, comparing them with theoretical expectations whenever possible. Furthermore, the main heating source accelerating ions in Tore Supra is ion cyclotron resonance range of frequency (ICRF) heating, and the paper provides new information on the ripple losses of ICRF accelerated ions.

Long pulse operation on the Tore Supra tokamak has entered a new phase, characterized by the use of heating power level in excess of 10 MW, during pulses lasting several tens of resistive times. This has been made possible by the use of ion cyclotron range of frequency (ICRF) heating (9 MW coupled to the plasma at 57 MHz), combined with lower hybrid current drive (LHCD: 3 MW at 3.7 GHz) and efficient fuelling techniques (supersonic gas injection, pellets). This paper addresses key technological, operational and physics issues related to the long pulse operation of the Tore Supra ICRF system and required for a reactor: R&D on the ICRF plant, real-time control and safety procedures, integration with other tokamak subsystems, experimental investigation and theoretical modelling of the edge ICRF physics (wave coupling, heat loads on antenna front faces). As far as possible lessons are drawn from the experience gained on Tore Supra for the design and operation of a next-step device.