No abstract

In this study, the jute/polypropylene nonwoven reinforced composites were prepared using film stacking method. The surface of jute fibers was modified using alkali treatment. These alkali treated jute fiber nonwoven composites were analyzed for their tensile and flexural properties. Increasing the amount of jute fibers in the nonwovens has improved the mechanical properties of their composites. The effect of stacking sequence of preferentially and nonpreferentially aligned nonwovens within the composites was also investigated. The flexural and tensile moduli of composites were found to be significantly enhanced when nonwovens consisting of preferentially and nonpreferentially aligned jute fibers were stacked in an alternate manner. The existing theoretical models of tensile modulus of fiber reinforced composites have been analyzed for predicting the tensile modulus of nonwoven composites. In general, a good agreement was obtained between the experimental and theoretical results of tensile modulus of nonwoven composites. POLYM. COMPOS., 35:1044–1050, 2014. © 2013 Society of Plastics Engineers

The increasing trend of the use of synthetic products may result in an increased level of pollution affecting both the environment and living organisms. Therefore, from the sustainability point of view, natural, renewable and biodegradable materials are urgently needed to replace environmentally harmful synthetic materials. Jute, one of the natural fibers, plays a vital role in developing composite materials that showed potential in a variety of applications such as household, automotive and medical appliances. This paper first reviews the characterization and performance of jute fibers. Subsequently, the main focus is shifted towards research advancements in enhancing physical, mechanical, thermal and tribological properties of the polymeric materials (i.e., synthetic or biobased and thermoplastic or thermoset plastic) reinforced with jute fibers in a variety of forms such as particle, short fiber or woven fabric. It is understood that the physio-mechanical properties of jute-polymer composites largely vary based on the fiber processing and treatment, fiber shape and/or size, fabrication processes, fiber volume fraction, layering sequence within the matrix, interaction of the fiber with the matrix and the matrix materials used. Furthermore, the emerging research on jute fiber, such as nanomaterials from jute, bioplastic packaging, heavy metal absorption, electronics, energy device or medical applications and development of jute fiber composites with 3D printing, is explored. Finally, the key challenges for jute and its derivative products in gaining commercial successes have been highlighted and potential future directions are discussed.

No abstract

No abstract