No abstract

No abstract

In this paper, a three-phase ac-dc converter using three single-phase pulse width modulated active clamped, zero-voltage-switched boost converter in modular approach is presented. The active clamp technique is used for zero-voltageswitching of the main and auxiliary switches. The operating modes, analysis, and design considerations for the proposed converter are explained. To evaluate the performance of the proposed converter, finally simulation and experimental results for a 500-V, 1.5-kW prototype converter are presented. The proposed converter operates at almost unity power factor with reduced output filter size. The output voltage is regulated without affecting zero-voltage-switching, even under unbalanced three-phase input voltages.Index Terms-Active clamp, boost converter, three-phase ac-dc converter, unity power factor.

This article presents a high-gain DC-DC converter consisting of a quadratic boost converter and a voltage multiplier, which helps to lift up the voltage gain. The gain will be further enhanced by increasing the turn's ratio of the coupled inductor. The key features include ultrahigh gain, low voltage stress across switching devices, low input current ripple, and hence, it is preferably suitable for renewable energy applications. A passive clamp lowers the voltage stress across MOSFET, so allowing switch with lower R ds(on) reduces the system cost. Besides this, input inductor makes current continuous and reduces input current ripple. The reverse recovery problem of diodes also gets diminished with the usage of leakage energy of the coupled inductor. The operating principle with different modes of operation is also explained. Zero current switching (ZCS) turn-on is achieved for power switch, and ZCS turn-off is achieved for diodes, which helps to reduce the switching losses. This improves the overall system efficiency. A 250-W prototype is built up to validate the converter.

No abstract