No abstract

Purpose This paper aims to develop at sewing thread during the seam formation may lead to the compression of fabric under seam. In the present study, the model has been proposed to predict the seam compression and calculation of seam boldness, as well as thread consumption by considering seam compression. Design/methodology/approach The effect of sewing parameters on the fabric compression at the seam (Cf) for fabrics of varying bulk density was studied by the Taguchi method and also the multilinear regression equation is obtained to predict seam compression by considering these parameters. The framework has been set as per the single view metrology approach to measuring structural seam boldness (Bs). One of the basic geometrical models (Ghosh and Chavhan, 2014) for the prediction of thread consumption at lock stitch has been modified by considering fabric compression at the seam (Cf). Findings The multilinear regression model has been proposed which can predict the compression under seam using easily measurable fabric parameters and stitch density. The seam boldness is successfully calculated quantitatively using the proposed formula with a good correlation with the seam boldness rated subjectively. The thread consumption estimation from the proposed approach was found to be more accurate. Originality/value The compression under seam is found out using easily measurable parameters; fabric thickness, fabric weight and stitch density from the proposed model. The attempt has been made to calculate seam boldness quantitatively and the new approach to find out thread consumption by considering the seam compression has been proposed.

Purpose This paper aims to propose the artificial neural network (ANN) and regression models for the estimation of the thread consumption at multilayered seam assembly stitched with lock stitch 301. Design/methodology/approach In the present study, the generalized regression and neural network models are developed by considering the fabric types: woven, nonwoven and multilayer combination thereof, with basic sewing parameters: sewing thread linear density, stitch density, needle count and fabric assembly thickness. The network with feed-forward backpropagation is considered to build the ANN, and the training function trainlm of MATLAB software is used to adjust weight and basic values according to the optimization of Levenberg Marquardt. The performance of networks measured in terms of the mean squared error and the layer output is set according to the sigmoid transfer function. Findings The proposed ANN and regression model are able to predict the thread consumption with more accuracy for multilayered seam assembly. The predictability of thread consumption from available geometrical models, regression models and industrial empirical techniques are compared with proposed linear regression, quadratic regression and neural network models. The proposed quadratic regression model showed a good correlation with practical thread consumption value and more accuracy in prediction with an overall 4.3% error, as compared to other techniques for given multilayer substrates. Further, the developed ANN network showed good accuracy in the prediction of thread consumption. Originality/value The estimation of thread consumed while stitching is the prerequisite of the garment industry for inventory management especially with the introduction of the costly high-performance sewing thread. In practice, different types of fabrics are stitched at multilayer combinations at different locations of the stitched product. The ANN and regression models are developed for multilayered seam assembly of woven and nonwoven fabric blend composition for better prediction of thread consumption.

No abstract

No abstract