A scientific drilling program is being carried out by the National Autonomous University of Mexico (UNAM) at the southern sector of the Chicxulub impact crater in the Yucatan Peninsula, Mexico. Eight boreholes, ranging in depth from 60 m to 702 m, with a total of 2.62 km of continuos core, were recovered. A high recovery rate of up to 99% (overall average recovery rate for the eight boreholes is 87%) allows us to investigate in detail the stratigraphy of the impact lithologies and the Tertiary carbonate sequence. Three of the boreholes (UNAM-5, UNAM-6, and UNAM-7, with core recovery rates from 89 to 99%) sampled impact breccias that were classified in two units-an upper breccia sequence rich in basement clasts, impact glass, and fragments of melt (suevite-like breccia) and a lower breccia sequence rich in limestone, dolomite, and evaporite clasts (bunte-like breccia). Depths of contact between the Tertiary carbonate sequence and the impact breccias are 332.0 m in UNAM-5, 222.2 m in UNAM-7, and 282.8 m in UNAM-6, giving the depth to the K/T boundary. In UNAM-7, the contact between the upper and the lower breccias is at 348.4 m, which yields a thickness of 126.2 m for the suevite-like breccia. The rest of the boreholes sampled part of the Tertiary carbonate sequence (~200 m thick), composed mainly of limestones, dolomitized carbonates, and calcarenite, with some fossiliferous horizons.