No abstract

No abstract

ABSTRACT:The effects of processing parameters on the strength of the fusion bonding interface have been investigated. The interface was generated when an isotactic polypropylene homopolymer was injection molded on a solid self-reinforced polypropylene substrate. The interface strength was measured in shear configuration, and the melting behavior of substrate was studied using differential scanning calorimetry. The results show that strong bonding interface can be achieved when the correct processing parameters are chosen. The interfacial strength is largely improved if the interface temperature is higher than the melting temperature of the substrate layer, and in these specimens failure does not take place at the interface. Furthermore, for a fixed interface temperature, interface strength increases with thermal gradient. Finally, in the analyzed holding pressure range, pressure apparently has no effect on strength.

The study was conducted to evaluate the cytocompatibility and hydrolytic degradability of the new poly(lactic acid)/polyethylene glycol-polyhedral oligomeric silsesquioxane (peg-POSS/PLLA) nanocomposite as potential material for cartilage regeneration. PLLA scaffolds containing 0 to 5% of peg-POSS were fabricated by electrospinning. Human mesenchymal stem cells (hMSC's) were cultured in vitro to evaluate the cytocompatibility of the new nanocomposite material. Hydrolytic degradation studies were also carried out to analyze the mass loss rate of the nanocomposites through time. The addition of the peg-POSS to the PLLA did not affect the processability of the nanocomposite by electrospinning. It was also observed that peg-POSS did not show any relevant change in fibers morphology, concluding that it was well dispersed. However, addition of peg-POSS caused noticeable decrease in mean fiber diameter, which made the specific surface area of the scaffold to rise. hMSC's were able to attach, to proliferate, and to differentiate into chondrocytes in a similar way onto the different types of electrospun peg-POSS/PLLA and pure PLLA scaffolds, showing that the peg-POSS as nano-additive does not exhibit any cytotoxicity. The hydrolytic degradation rate of the material was lower when peg-POSS was added, showing a higher durability of the nanocomposites through time. Results demonstrate that the addition of peg-POSS to the PLLA scaffolds does not affect its cytocompatibility to obtain hyaline cartilage from hMSC's.

No abstract