This article explores the design and analysis of a novel ultra‐wideband (UWB) antenna for body‐centric applications. The designed antenna consists of circular ring structured radiating element with 24 spokes, which resembles the shape of Ashoka chakra (Indian National flag emblem). The antenna placed on the semi flexible RT/Duroid 5880 with dielectric constant of 2.2 and occupying the dimension of 30 × 25 × 0.8 mm3. The present design aims at optimizing the antenna structure to cater UWB operating spectrum (3.1‐10.6 GHz) with a novel patch shape, which looks like the Ashoka chakra. The proposed antenna is analyzed by placing on three‐layered human phantom model and examined on head, arm at three of its operating frequencies. The maximum specific absorption rate (SAR) is found to be 1.23 W/kg and 1.29 W/kg when computed at arm and head of the human body respectively. The SAR values are observed under those conditions are satisfying the international safety standards such as FCC & IEEE C95.1:2005 & ICNIPR. Analysis of system savant (ANSYS Savant) radiation performance characteristics are also studied by placing the proposed antenna on virtual human body environment.

This article presents the design and analysis of a dual-band antenna with circular polarization for ISM and WLAN band applications. The proposed antenna operates at two frequencies ranging from 2.1-3.1 GHz and 4.4-7.7 GHz with resonating frequencies at 2.45 GHz industrial, scientific and medical band (ISM) and 5.8 GHz wireless local area network band (WLAN). The antenna is fed by coplanar waveguide feeding (CPW) with an asymmetric ground structure, and the radiating element consists of 24 spokes in the design. The current antenna providing the impedance bandwidths of 38.4% and 49% at two operating bands. The proposed antenna exhibiting circular polarisation with 3 dB axial ratio bandwidth of 150 MHz at 2.33-2.48 GHz and 1600 MHz at 5.14-6.74 GHz. The designed antenna is fabricated on an RT Duroid 5880 substrate with dimensions of 40 × 28 × 0.4 mm 3 . The intension behind the design of this antenna is to use it for wearable applications in conformal nature with low specific absorption rate (SAR). The SAR values observed at two operating frequencies are 1.09 W/Kg and 1.47 W/Kg on hand and 0.946 W/Kg and 1.12 W/Kg on head, respectively. The placement and radiation characteristics analysis is done with Ansys Savant tool, and the subsequent measured results provide good correlation with simulation results.

In this article a compact frequency reconfigurable antenna is presented for wireless communication applications of industrial, scientific and medical band (ISM). The proposed antenna model is designed with the dimensions of 58mm×48 mm on FR4 epoxy of dielectric constant 4.4 with the thickness of 0.8 mm. The proposed antenna consists of defected T-shape ground plane, which acts as a reflector. In the design of frequency reconfigurable antenna, BAR 64-02V PIN diodes are used as switching elements and antenna is fed by microstrip transmission line. The proposed antenna can switch at different frequencies (2.5 GHz, 2.3 GHz and 2.2 GHz) depending on the biasing voltage applied to the PIN diodes. The current antenna showing VSWR < 2 in the operating band and providing peak realized gain of 3.2 dBi. A good matching obtained between expected and the measured results.

An implantable antenna is designed for body area network, industrial scientific and medical applications with low specific absorption rate (SAR). The proposed antenna with defected ground structure (DGS) is designed on the FR4 substrate as well as on polyimide substrate. The designed antenna providing dual band characteristics at (Industrial scientific and medical) ISM band of 2.5 GHz and location application for emergency services (LAES) band at 4.2 GHz. The electromagnetic radiation is evaluated using the specific absorption rate in three layered phantom models and the SAR values of the antenna are evaluated by placing the antenna at different levels. The antenna distance is varied inside the skin layer to 5 mm away from the threelayered model and observed the reduction in SAR, when moving away from skin tissue. The observed value of SAR satisfies the IEEE-C95-1-2005 standards at ISM operating band. The proposed antenna is tested on threelayered phantom model in simulation through HFSS and in the real time on artificial layers with the help of combinational analyzer (CNA) connection.

No abstract