No abstract

The mechanical properties of carbon fiber-reinforced epoxy composites were identified by adding carbon-based nano-reinforcements, such as multi-wall carbon nanotubes (CNTs) and graphene platelets (GP), into the epoxy matrix by conducting suitable experiments. The main focus of this study is to compare the tensile modulus, tensile strength, flexural modulus, flexural strength, and thermal conductivity of carbon fiber-reinforced epoxy composites with nanoparticle reinforcement. The results revealed that adding CNTs and GP nanoparticles improved the mechanical properties compared to a pure carbon fiber-reinforced plastic composite. However, compared to CNTs, the GP's addition has increased the mechanical properties of the CFRP composite. In addition, scanning electron microscopy (SEM) images were presented to explore the microstructural characterization of carbon fiber-reinforced nanoparticle-reinforced composites. Further, using numerical studies, the transverse modulus, major and minor Poisson’s ratio of the carbon fibre reinforced with CNT and GP particle reinforcement were estimated. The current study is applied to the efficient design of nanoparticle reinforced carbon fibre reinforced composites.

In the current research work an attempt is made to utilize the ecofriendly biochar materials as reinforcements in polymer composites. Biochar materials were developed from Arhar stalks and Bael shells waste biomass by pyrolysis process and studied for different characteristics. The surface morphology, crystalline structure, fixed carbon content and elemental composition of synthesized biochar materials were studied using scanning electron microscope, x-ray diffraction and proximate analysis. The results showed that the biochar (BB) produced using Bael shells are highly amorphous in nature and have high amount of elemental carbon than arhar stalk biochar (AB). Using epoxy as matrix and biochar materials as reinforcement composites were fabricated with three different filler weight fractions i.e., 2%, 4% and 6%. The composites with 4% Bael shell biochar exhibited high tensile strength, and has 183% more strength when compared with neat epoxy. Increasing the filler percentage from 4% to 6% the strength and hardness of composites reduced due to poor interfacial bonding. Morphological studies were performed on fractured surfaces of tensile tested samples by using scanning electron microscope. From thermogravimetric analysis it was found that with the inclusion of biochar materials thermal stability of composites was significantly enhanced. 4% Bael biochar composites (BBC) exhibited higher thermal resistance which left 8% residual mass.

Abstract

Hybrid polymer composites are more attractive because of their light in weight, more robust and rigid (in the direction of fiber) than traditional or unreinforced polymers with the added advantage of having their design and form adapted to suit the specifications of a particular application by the combination of the right choice of the materials. Reinforcement in a polymer hybrid composite can be fiber, filler, or fiber& filler together. Integrating reinforcement into polymers can lead to significant growth in the wear characteristics and mechanical properties of the polymer. Nevertheless, in applications wherever interaction by the liquid medium is inevitable, the mechanical properties and wear characteristics of hybrid polymer composites undergo degradation, which is a generally seen phenomenon since liquid medium acts as a plasticizer. This study aims to provide detailed information on the mechanical and tribological effects of hybrid polymer composites. More emphasis is given towards degradation of mechanical properties such as tensile strength, bending strength, and degradation of wear characteristics like erosion wear rate, and respective failure characteristics were analyzed under different environments such as water, kerosene, saline, sub-zero conditions.