No abstract

No abstract

Characterization of oxide scale and α-casing in Ti6Al4V titanium alloy oxidized at 1050, 1150, 1250 and 1340 K for 2, 4, 6, 8 and 12 h in a dynamic oxygen gas atmosphere has been analyzed. The oxide scale exhibited a spalling tendency. Its thickness systematically increased with the temperature and the duration of the oxidation. At a later stage the scale exhibited a catastrophic growth due to the increased porosity. The oxygen stabilized α-phase and its volume fraction as well as its hardness decreased with the distance in the metal matrix (α-casing). Estimated oxygen diffusion coefficients based on the hardness profiles across α-casing were 7.0 × 10−14, 8.5 × 10−14, and 1.2 × 10−13, 1.8 × 10−13 m2/s at 1050, 1150, 1250, and 1340 K, respectively. Similarly, the overall activation energy for diffusion of oxygen in the alloy was 105 kJ mol−1. EDS analysis across α-casing in the internal oxidation zone revealed sharp concentration wells for Ti and Al. Titanium concentration decreased and that of aluminum increased in these wells.

9Cr-1Mo ferritic steel samples containing 0.2 and 0.5 wt % silicon in 40 % cold rolled state were recrystallize-annealed at 1100, 1200 and 1300 K. The grain growth and mechanical properties after recrystallization-annealing for 20 hr to 100 hr were investigated. No significant grain growth was observed even after 100 hr annealing at 1100 and 1200 K. The recrystallization-annealing at 1200 K resulted grains smaller in size than those at 1100 K. Annealing at 1300 K exhibited the enhanced grain growth with decorative microstructures. Initial annealing after cold rolling at 1100 K exhibited low hardness which further increased with annealing temperature. Annealing at 1100 K for 20 hrs exhibited low yield strength and ultimate tensile strength compared to those of as received samples. However, for 100 hrs annealing these properties remained nearly constant for 0.2 Si composition and increased marginally for 0.5 Si composition. Recrystallization-annealing exhibited improved ductility for both the compositions.