Power‐to‐gas is a storage technology aiming to convert surplus electricity from renewable energy sources like wind and solar power into gaseous fuels compatible with the current network infrastructure. Results of CO2 dissociation in a vortex‐stabilized microwave plasma reactor are presented. The microwave field, residence time, quenching, and vortex configuration were varied to investigate their influence on energy‐ and conversion efficiency of CO2 dissociation. Significant deterioration of the energy efficiency is observed at forward vortex plasmas upon increasing pressure in the range of 100 mbar towards atmospheric pressure, which is mitigated by using a reverse vortex flow configuration of the plasma reactor. Data from optical emission shows that under all conditions covered by the experiments the gas temperature is in excess of 4000 K, suggesting a predominant thermal dissociation. Different strategies are proposed to enhance energy and conversion efficiencies of plasma‐driven dissociation of CO2.

No abstract

No abstract

No abstract

The investigated new microwave plasma torch is based on an axially symmetric resonator. Microwaves of a frequency of 2.45 GHz are resonantly fed into this cavity resulting in a sufficiently high electric field to ignite plasma without any additional igniters as well as to maintain stable plasma operation. Optical emission spectroscopy was carried out to characterize a humid air plasma. OH-bands were used to determine the gas rotational temperature Trot while the electron temperature was estimated by a Boltzmann plot of oxygen lines. Maximum temperatures of Trot of about 3600 K and electron temperatures of 5800 K could be measured. The electron density ne was estimated to ne ≈ 3 · 10 20 m −3 by using Saha's equation. Parametric studies in dependence of the gas flow and the supplied microwave power revealed that the maximum temperatures are independent of these parameters. However, the volume of the plasma increases with increasing microwave power and with a decrease of the gas flow. Considerations using collision frequencies, energy transfer times and power coupling provide an explanation of the observed phenomena: The optimal microwave heating is reached for electron-neutral collision frequencies νen being near to the angular frequency of the wave ω.