No abstract

In 1992, Chevron USA initiated a large waterflood program in the Belridge Diatomite at Lost Hills Field. Injection and production wells are hydraulically propped-fractured, and water is injected across a vertical interval of approximately 600 ft. The injected water is assumed to follow the hydraulic fractures and spread laterally outward. However, the extent of flooding, the saturation variations between individual layers, and the connection between waterflood patterns are poorly understood. During this same time period, crosswell electromagnetic technology was developed and tested in other fields in the San Joaquin Valley. This technology can provide an interwell resistivity distribution from wells separated by up to 1000 ft, and thus, may be suitable for mapping water saturation variation and reservoir structure. In this paper we describe the application of crosswell EM technology to several waterflood patterns at Lost Hills. The first cases involve surveys between closely spaced fiberglass-cased observation wells across and perpendicular to a hydraulic fracture. The interwell resistivity distribution identified the edge of the waterflooded region and mapped saturation variation between the layers that were affected by the flood. In another example, crosswell data that were collected parallel to hydraulic fracture planes show the connection of injection plumes and also significant saturation variation between layers. Introduction Producing oil and gas at the Lost Hills field is an ever-increasing challenge. Although over 2 billion barrels of oil is in place, oil production is difficult due to low matrix permeability and unusual formation properties in the diatomite. Operators are frequently plagued by issues of low production rates, ground subsidence and well instability. Chevron USA is testing a variety of technologies to improve both production and overall recovery. These include induced fracturing, and water, steam and CO2 floods. Most new technologies are tested in pilot studies. Considerable effort is expended to monitor the results of the pilot tests in order to track reservoir changes during production and injection, improve production and injection rates, better characterize existing resources, and determine the best alternatives for expanding the pilots and increasing oil recovery. As part of the waterflooding program, Chevron has established several pilot sites where a number of observation wells are drilled and new production, injection or monitoring technologies are tested. In two of these pilots, Chevron has installed two fiberglass-cased wells surrounding an injection well and has applied several logging technologies, as well as crosswell electromagnetics (EM) to evaluate the present status of the resource and to identify the progress of the ongoing waterflood. The crosswell EM technology is attractive because of its capability to map the interwell resistivity distribution. This, in turn, allows for convenient tracking of ongoing flooding operations as well as improved reservoir characterization. In this paper we will briefly describe the crosswell EM technology and illustrate its application to reservoir characterization using data collected at Lost Hills.

This report was prepared as an account of work sponsored by the United States Government. Neither the United States nor the Department of Energy, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibilityfor the accuracy, completeness or usefulness of any information, apparatus, product or process disclosea, or represents that its use would not infringe privately owned rights.

This is • in_ln'int of a paper _nd _1 forpublication in a journal or pmca_lingL Sin_ chanses may be made before publication, this preprint is made available with the understanding that it will not be cited or reproduced without the permi_ion of the author. DISCLAIMER This document was prepared m an account of work sponsored by an agency o/"the United States Government. Neither the United States Government nor the University of California nor any of their employees, makes any wm'ranty, express or implied, or assumes anylegal liabilityor responsibilityforthe accuracy, completeness,orusefulness of any information, apparatus, product, or processdisclosed, or represents thatits use wouldnot infringe privatelyowned rights. Refertnce herein to any specific commercial products, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endors,ntmt, recommendation, orfavoring by the United States Government or the University of California. The views and opinions of authors expressed herein do not necessmily state or reflect those of the United States Government or the University of Calitbrnia, and shall not be used for advertising or product endorsement purposes.

SBIR phase II project 40145-97-1 calls for the design and construction of a prototype inductive logging device to measure formation resistivity from within a steel-cased borehole. The SCIL (Steel Casing Induction Logger) tool is intended for reservoir characterization and process monitoring in an oil field environment. This report summarizes findings from the initial project period.