The oxidation of tin layers deposited onto alumina substrates is investigated with the aim to identify the different steps of the process and obtain information on the sample homogeneity, phase segregation, and degree of oxidation. It is shown that at least three phases coexist at 450 °C, Sn, SnO, and SnO2, and remarkable inhomogeneities, already visible at an optical inspection, are found in the thin film. A micro-Raman mapping of the layer shows that these inhomogeneities are related to the presence of different Sn oxidation states, as evidenced by the inhomogeneous distribution of SnO and SnOx Raman bands. The thin film becomes homogeneous after annealing treatments above 550 °C, where only the SnO2 cassiterite phase is detected.

The influence of the niobium content on the anatase-to-rutile phase transition in nanopowders of Nb–Ti oxides was studied and the changes in the particle size and microstrain distribution obtained at different temperatures were analyzed. A correlation is found between the initial microstructure in the Ti1 – xNbxO2 (x = 0.03, 0.2) powder and the niobium content. The presence of Nb was found to inhibit the growth of both the anatase and the rutile phases.

No abstract

No abstract

No abstract