No abstract

Among bioceramics, zirconia (ZrO(2)) and alumina (Al(2)O(3)) possess exceptional mechanical properties suitable for load-bearing and wear-resistant applications but the poor bioactivity of these materials is the major concern when bonding and integration to the living bone are desired. This article investigates two different approaches and their underlying mechanisms to improve the bioactivity of zirconia (3Y-TZP) and a zirconia composite with alumina (10Ce-TZP/Al(2)O(3)). Chemical treatment approach applied on 3Y-TZP where the substrates were soaked in 5M H(3)PO(4) to create chemically functional groups on the surface for inducing apatite nucleation. X-ray photoelectron spectroscopy (XPS) was used to detect chemical changes and X-ray diffraction (XRD) to monitor phase changes on the surface before and after acid treatment. Alternate soaking approach applied on 10Ce-TZP/Al(2)O(3) consisted of soaking the composite substrates in CaCl(2) and Na(2)HPO(4) solutions alternately to make a precursor for apatite formation. The bioactivity was evaluated by apatite-forming ability of surface-treated materials in simulated body fluid (SBF). Both methods resulted in the formation of hydroxyapatite on the surface of materials; however, alternate soaking approach showed to be a simpler, faster, and more effective method than the chemical treatment approach for enhancing the bioactivity of zirconia materials.

Monolithic zirconia materials (3Y-TZP, 10Ce-TZP, and 12Ce-TZP) and their composites with 30 vol% alumina were produced. Low-temperature aging degradation (LTAD) and mechanical properties of materials were investigated. For assessment of phase stability in the materials, aging experiments were performed in water at 90°C for 32, 64, and 128 days. The aging phenomenon was characterized and monitored using X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Four-point bending was used to determine the flexural strength of materials before and after aging treatment in water at 90°C for 2, 4, and 6 months. The aging experiments resulted in different phase transformation rates for the materials studied. The 12Ce-TZP containing materials showed the highest resistance to low-temperature aging and 3Y-TZP containing materials showed the highest bending strength.

No abstract

No abstract