The article presents measures to improve the quality of cementing the production string of high-performance wells. The relevance of the proposed technological solutions is substantiated. The results of experimental studies of the installation simulating the processes occurring during the thickening of the cement slurry under the action of gravitational forces are presented. An algorithm for creating overpressure on the wellhead during fastening of the production string is proposed. The compositions of process fluids are described, which increase the reliability of the annular space isolation and preserve the permeability of the reservoir, and provide the main data on the results of their laboratory studies. For cementing the annular space of the production string, the composition of the expanding cement slurry has been developed and the procedure for its preparation has been established. The proposed solution has low water separation and high sedimentation resistance; has adjustable rheological parameters. Cement stone is characterized by low gas permeability and high strength properties.

The article presents measures to improve the quality of cementing the production string of high-performance wells. The relevance of the proposed technological solutions is substantiated. The results of experimental studies of the installation simulating the processes occurring during the thickening of the cement slurry under the action of gravitational forces are presented. An algorithm for creating overpressure on the wellhead during fastening of the production string is proposed. The compositions of process fluids are described, which increase the reliability of the annular space isolation and preserve the permeability of the reservoir, and provide the main data on the results of their laboratory studies. For cementing the annular space of the production string, the composition of the expanding cement slurry has been developed and the procedure for its preparation has been established. The proposed solution has low water separation and high sedimentation resistance; has adjustable rheological parameters. Cement stone is characterized by low gas permeability and high strength properties.

Most drilling rigs are designed based on the max static load on the hook of great travelling system structure as 6×7. But when change the depth of the well, the load on the hook changes, so it was necessary to determine the travelling system structure, which ensures the best design indicators  of hoisting system. This research studied the impact of travelling system structure on design parameters of hoisting system and the best indicators of hoisting systems at less drilling lines number suitable with max allowable load on hook   for oil and gas wells drilling units. In this work, A methodology depending on graphical solution for hoisting system indicators curves has been developed. (MATLAB) has been used in order to develop a program that facilitates the application of this methodology and accelerate the work. The most important technical parameters for different drilling unit, in addition to the allowable hookload, by using the most important design indicators that positively or negatively affecting the system with changing travelling system structure. This program depending on graphical solution for set of these indicators in relation with number of drilling lines by finding equilibrium point between positive and negative effects that has the algebraic sum of the slopes is as close as possible to zero. This point represent optimal drilling lines compatible with hookload at practical technical parameters for drilling units. This study achieves the best indicators for hoisting system working at ideal travelling system and decrease the time required for drilling by increasing hook velocity rate by 12% and the efficiency of hoisting system by 10%. In addition, the lengths of drilling line rate decreased by 40% that cause reduction in material cost and achieving better economic feasibility in comparison with design travelling system.