Wearable devices are nowadays at the edge-front in both academic research as well as in industry, and several wearable devices have been already introduced in the market. One of the most recent advancements in wearable technologies for biosensing is in the area of the remote monitoring of human health by detection on-the-skin. However, almost all the wearable devices present in the market nowadays are still providing information not related to human ‘metabolites and/or disease’ biomarkers, excluding the well-known case of the continuous monitoring of glucose in diabetic patients. Moreover, even in this last case, the glycaemic level is acquired under-the-skin and not on-the-skin. On the other hand, it has been proven that human sweat is very rich in molecules and other biomarkers (e.g., ions), which makes sweat a quite interesting human liquid with regards to gathering medical information at the molecular level in a totally non-invasive manner. Of course, a proper collection of sweat as it is emerging on top of the skin is required to correctly convey such liquid to the molecular biosensors on board of the wearable system. Microfluidic systems have efficiently come to the aid of wearable sensors, in this case. These devices were originally built using methods such as photolithographic and chemical etching techniques with rigid materials. Nowadays, fabrication methods of microfluidic systems are moving towards three-dimensional (3D) printing methods. These methods overcome some of the limitations of the previous method, including expensiveness and non-flexibility. The 3D printing methods have a high speed and according to the application, can control the textures and mechanical properties of an object by using multiple materials in a cheaper way. Therefore, the aim of this paper is to review all the most recent advancements in the methods for 3D printing to fabricate wearable fluidics and provide a critical frame for the future developments of a wearable device for the remote monitoring of the human metabolism directly on-the-skin.

No abstract

A simple and sensitive electrochemical sensor is purposed for the preconcentration and determination of zearalenone using a carbon paste electrode modified with multi-walled carbon nanotubes. A differential pulse voltammetric method is employed to study the behavior of zearalenone on this modified electrode. The analytical procedure consists of a closed-circuit accumulation step onto the modified electrode. An anodic peak, related to the oxidation of accumulated and reduced zearalenone on the electrode surface, was observed at 0.40 V. The calibration curve was linear in the range of 2.0-50.0 ng mL(-1). The limit of detection was found to be 0.58 ng mL(-1), and the relative standard deviations for five replicated determinations at 5.0 and 30.0 ng mL(-1) of zearalenone were 2.71 and 1.44%, respectively. The modified electrode was applied successfully for the analysis of zearalenone in different malt beverage samples.

No abstract