Cr-doped Hb zeolite is found to have better catalytic performance than Hb zeolite in the Friedel-Crafts acylation of anisole, with acetic anhydride conversion of over 99% and nearly 100% selectivity to furnish para-methoxyacetophenone under the optimized reaction conditions. This is attributed to the increase of weak and moderately strong acid sites, caused by the Cr addition. The formation of carbonaceous materials and their coating of the acid sites are believed to be the reasons for the deactivation of the reused Cr-doped Hb zeolite, as indicated by the Brunauer-Emmett-Teller (BET) method, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and NH 3 temperature-programmed desorption (NH 3 -TPD) measurement results. The catalyst activity can be recovered by a subsequent calcination.

No abstract

Friedel-Crafts acylation of pyrrole with acetic anhydride was studied over different zeolites and an ultrasonic-assisted phosphoric acid-modified Hb (P-Hb-US) zeolite was found to have the best catalytic performance among all the zeolites examined. The conversion of acetic anhydride reached 98.8% and the selectivity to acetylpyrroles was 97.0% under the optimized conditions. The high activity of the P-Hb-US zeolite is attributed to the increase of weak acid sites, caused by the synergistic effect between the phosphoric acid modification and ultrasound. Moreover, the carbonaceous deposits, mainly due to the adsorption of reactants and products, on the surface acid sites and the blockage of the pores is believed to be the reason for the deactivation of the reused P-Hb-US zeolite, confirmed from the Brunauer-Emmett-Teller (BET) method, scanning electron microscopy, and X-ray photoelectron spectroscopy. Furthermore, the catalyst activity can be recovered effectively by a subsequent calcination.

Nano-hydroxyapatite/chitosan-chondroitin sulfate composites materials with different weight ratios were prepared through liquid co-precipitation method. The nano-Hap、Hap/Cs and Hap/Cs-Chs composites materials under the same conditions preparation materials were researched By XRD, SEM and EDS respectively. The results show that nano-Hap particles with poorly crystallinity, the size is about 20nm, nano-Hap particles are spherical in sHape and dispersed uniformly, combined with relatively loose between particles, the small nano-particles aggregate into larger particles when the Hap composite with the Cs and Chs, nano-Hap were dispersed uniformly in the organic phase Cs and Chs, Hap particles have the trend to grow large in composites materials,crystal become more perfect, combination become relatively dense between particles, The composites materials were annealed at 700°C,Hap crystal particles become more perfect clear and larger with relatively loose between particles.EDS analysis showed that the compound before and after annealing of the material ratio of calcium had no influence, material does not contain any impurities,The ratio of calcium and phosphorus is about 1.75:1,Hap belonging to the type of calcium-rich

No abstract