No abstract

Jute, unlike other natural fibers, absorbs moisture and its moisture regain property is quite high. Water migration and subsequent degradation of jute-based composites can be a problem. Because jute is hydrophilic and the matrix resins are mostly hydrophobic, wetting of the fibers with resins is poor, for which high resin consumption may occur that would increase the cost of composites. To reduce the moisture regain property of jute fiber, it is essential to pretreat the jute fiber so that the moisture absorption is reduced and the wettability of the resin is improved. Jute fiber in the form of nonwoven jute has been pretreated with precondensate like phenol formaldehyde, melamine formaldehyde, cashew nut shell liquid-formaldehyde, and polymerized cashew nut shell liquid. The moisture content of the pretreated nonwoven jute has been determined by conventional methods and by a differential scanning calorimetric technique. Treatment of jute with precondensate causes the reduction of water regain property in jute. Pretreated nonwoven jute has been impregnated with phenol formaldehyde resin, and the composite board has been prepared therefrom. The jute composite board has been tested for bending strength, tensile strength, thickness swelling, and water absorption. Thermal analyses, such as differential scanning calorimetry and thermogravimetry, have also been conducted on jute and pretreated jute fibers.

No abstract

No abstract

No abstract