The design and fabrication of a compact diffractive optical element is presented for the sorting of beams carrying orbital angular momentum (OAM) of light. The sorter combines a conformal mapping transformation with an optical fan-out, performing demultiplexing with unprecedented levels of miniaturization and OAM resolution. Moreover, an innovative configuration is proposed which simplifies alignment procedures and further improves the compactness of the optical device. Samples have been fabricated in the form of phase-only diffractive optics with high-resolution electron-beam lithography (EBL) over a glass substrate. A soft-lithography process has been optimized for fast and cheap replica production of the EBL masters. Optical tests with OAM beams confirm the designed performance, showing excellent efficiency and low cross-talk, with high fidelity even with multiplexed input beams. This work paves the way for practical OAM multiplexing and demultiplexing devices for use in classical and quantum communication.

A novel optical device is designed and fabricated in order to overcome the limits of the traditional sorter based on log-pol optical transformation for the demultiplexing of optical beams carrying orbital angular momentum (OAM). The proposed configuration simplifies the alignment procedure and significantly improves the compactness and miniaturization level of the optical architecture. Since the device requires to operate beyond the paraxial approximation, a rigorous formulation of transformation optics in the non-paraxial regime has been developed and applied. The sample has been fabricated as 256-level phase-only diffractive optics with high-resolution electron-beam lithography, and tested for the demultiplexing of OAM beams at the telecom wavelength of 1310 nm. The designed sorter can find promising applications in next-generation optical platforms for mode-division multiplexing based on OAM modes both for free-space and multi-mode fiber transmission.

Vertical-cavity surface-emitting lasers (VCSELs) are the predominant technology for high-speed short-range interconnects in data centers. Most short-range interconnects rely on GaAs-based multi-mode VCSELs and multi-mode fiber links operating at 850 nm. Recently, GaAs-based high-speed single-mode VCSELs at wavelengths > 1 µm have been demonstrated, which increases the interconnect reach using a single-mode fiber while maintaining low energy dissipation. If a suitable platform for passive wavelength- and space-multiplexing were developed in this wavelength range, this single-mode technology could deliver the multi-Tb/s interconnect capacity that will be required in future data centers. In this work, we show the first passive Si3N4 platform in the 1-µm band (1030-1075 nm) with an equivalent loss < 0.3 dB/cm, which is compatible with the system requirements of high-capacity interconnects. The waveguide structure is optimized to achieve simultaneously single-mode operation and low bending radius, and we demonstrate a wide range of high-performance building blocks, including arrayed waveguide gratings, Mach-Zehnder interferometers, splitters and low-loss fiber interfaces. This technology could be instrumental in scaling up the capacity and reducing the footprint of VCSEL-based optical interconnects and, thanks to the broad transparency in the near-infrared and compatibility with the Yb fiber amplifier window, enabling new applications in other domains as optical microscopy and nonlinear optics.

Multiple applications of relevance in photonics, such as spectrally efficient coherent communications, microwave synthesis or the calibration of astronomical spectrographs, would benefit from soliton microcombs operating at repetition rates <50GHz. However, attaining soliton microcombs with low repetition rates using photonic integration technologies represents a formidable challenge. Expanding the cavity volume results in a drop of intracavity intensity that can only be offset by an encompassing rise in quality factor. In addition, reducing the footprint of the microresonator on an integrated circuit requires race‐track designs that typically result into modal coupling losses and disruptions into the dispersion, preventing the generation of the dissipative single soliton state. Here, we report the generation of sub‐50GHz soliton microcombs in dispersion‐engineered silicon nitride microresonators. In contrast to other approaches, the authors' devices feature an optimized racetrack design that minimizes the coupling to higher‐order modes and reduces the footprint size by an order of magnitude to ≈1mm2. The statistical intrinsic Q reaches 19 million, and soliton microcombs at 20.5 and 14.0 GHz repetition rates are successfully generated. Importantly, the fabrication process is entirely subtractive, meaning that the devices can be directly patterned on the silicon nitride film.