No abstract

No abstract

No abstract

Nanocrystallised multilayered metallic material was obtained via duplex technique combining the surface mechanical attrition treatment (SMAT) with a novel constrained compression (CC) process. At the initial stage the 1 mm thick sheets of 316L austenitic stainless steel were processed by the SMAT in order to form a nanocrystalline structure. At the final stage discshaped plates excised from SMATed sheets, were assembled in a package and compressed in order to produce metallurgical bonding between individual plates. The characterization of such a multilayered structure was studied both experimentally and numerically. The microscopic examination revealed that the bonding occurred in the central portions of the package where the oxide scale covering each plate was fragmented by high shear strains. The numerical analysis confirmed that the strains at the interior interfaces are significantly higher than at the external ones. A high degree of structural inhomogeneity was observed via TEM studies in the regions where the successful bonding was achieved. Regions characterised by fine band structure with the presence of α′-martensite phase as well as coarse cellular structure within a single γ-austenite phase were identified.

Microalloyed steels have been the subject of theoretical and experimental studies revealing their exceptional mechanical response under nonlinear deformation conditions. In microalloyed steels, especially in multiphase steels, the mechanical properties are adjusted by combination of microstructure components with different levels of theirs mechanical responses, including hardness and ductility. A comprehensive studies have revealed that a transition from the development of usual bulk dislocation microstructures to more architecture ones occurs when the applied strain path allows to cumulate the deformation energy what is also strictly connected with the chemical and structural compositions of analyzed materials. The study presented here aims at understanding the complex strengthening mechanisms as well as microstructure evolution and to provide a link with the mechanical behaviour of investigated steels under nonlinear deformation conditions. The proper choice of the work hardening model for the cyclic plastic deformation is essential for predicting the inhomogeneities occurring during metal forming. Aim of the current work is to discuss the differences between various hardening models with respect to their capabilities in capturing complex deformation models and possibilities of their direct application to finite element modelling of such deformation processes. The results of experimental studies are integrated with computer modelling and dislocation theory to provide insight into the unprecedented combination of properties achieved in certain multiphase steels such as ultra-high flow strengths, good ductility and workability. Finally, based upon results obtained in performed computer simulations, conclusions regarding the possibilities of potential application of the work hardening models in the identification process parameters, trough the inverse analysis, are drawn.