Abstract.The geometry of bone scaffolds plays a crucial role in bone tissue regeneration. This architecture, especially pore size and shape, determines the mechanical strength of the scaffold. A number of previous workers have indicated the parameters which are believed to be the main stimulus in the adaptive bone remodelling process. An ideal bone manufacturing system would deliver bone morphogenetic proteins (BMP) and provide adequate mechanical properties. The aim of this study was to design a highly osteoconductive and mechanically strong bone regeneration scaffold which can be successfully manufactured. Three porous architectures of scaffold were designed using Solid Edge TM 3D solid modelling software. The equivalent trabecular structure model consisted of repeatable unit cells arranged in layers to fill the chosen scaffold volume. The three different unit cell structures examined include cubic, triangular, and hexagonal polyhedral. Designed scaffold's pores were varied in this study to 120, 340 and 600 m. This range was selected to meet one of the requirements of the scaffold design -the macropores must be at least 100 m in diameter, so the cells can penetrate and proliferate within the structure. The strengths of each scaffold were determined using ANSYS TM finite element software. Trabecular scaffold designs were analysed independently and in connection with simulated cortical bone in order to investigate their stress-strain response. As well as providing useful information on strengths developed from these topologies, the models developed indicated geometric constraints in order to tailor scaffolds to specific patient needs.

Fluid flow through a bone scaffold structure is an important factor in its ability to build up a living tissue. Permeability is often used as a measure of a structure’s ability to allow for flow of nutrients and waste products related to the growth of new tissue. These structures also need to meet conflicting mechanical strength requirements to allow for load bearing. In this work, the effect of different bone structure morphologies on permeability were examined both numerically and experimentally. Cubic and hexagonal based three dimensional scaffold structures were produced via stereolithography and 3D printing techniques. In particular, porosity percentage, pore size, and pore geometry were examined. Porosity content was varied from 30% to 70% and pore size from 0.34 mm to 3 mm. An adapted Kozeny-Carmen numerical method was applied for calculation of permeability through these structures and an experimental validation of these results was performed via a standard permeability experimental testing set-up. From the results it was determined that increased permeability was provided with the cubic rather than hexagonal structure as well as by utilizing the larger pore size and higher levels of porosity. Stereolithography was found to be the better processing technique, not only for improved micrometer scale dimensional accuracy reasons, but also due to the increase wettability found on the produced surfaces. The appropriate model constants determined in this work will allow for analysis of new alternate structure designs on the permeability of rapid prototyped synthetic bone structures.

Abstract.Fluid flow through a bone scaffold structure is an important factor in its ability to build up a living tissue. Permeability is often used as a measure of a structure's ability to allow for flow of nutrients and waste products related to the growth of new tissue. These structures also need to meet conflicting mechanical strength requirements to allow for load bearing. In this work, the effect of different bone structure morphologies on permeability were examined both numerically and experimentally. Cubic and hexagonal based three dimensional scaffold structures were produced via stereolithography and 3D printing techniques. In particular, porosity percentage, pore size, and pore geometry were examined. Porosity content was varied from 30% to 70% and pore size from 0.34 mm to 3 mm. An adapted Kozeny-Carmen numerical method was applied for calculation of permeability through these structures and an experimental validation of these results was performed via a standard permeability experimental testing set-up. From the results it was determined that increased permeability was provided with the cubic rather than hexagonal structure as well as by utilizing the larger pore size and higher levels of porosity. Stereolithography was found to be the better processing technique, not only for improved micrometer scale dimensional accuracy reasons, but also due to the increase wettability found on the produced surfaces. The appropriate model constants determined in this work will allow for analysis of new alternate structure designs on the permeability of rapid prototyped synthetic bone structures.

Fluid flow through a bone scaffold structure is an important factor in its ability to build up a living tissue. Permeability is often used as a measure of a structure's ability to allow for flow of nutrients and waste products related to the growth of new tissue. These structures also need to meet conflicting mechanical strength requirements to allow for load bearing. In this work, the effect of different bone structure morphologies on permeability were examined both numerically and experimentally. Cubic and hexagonal based three dimensional scaffold structures were produced via stereolithography and 3D printing techniques. In particular, porosity percentage, pore size, and pore geometry were examined. Porosity content was varied from 30% to 70% and pore size from 0.34 mm to 3 mm. An adapted Kozeny-Carmen numerical method was applied for calculation of permeability through these structures and an experimental validation of these results was performed via a standard permeability experimental testing setup. From the results it was determined that increased permeability was provided with the cubic rather than hexagonal structure as well as by utilizing the larger pore size and higher levels of porosity. Stereolithography was found to be the better processing technique, not only for improved micrometer scale dimensional accuracy reasons, but also due to the increase wettability found on the produced surfaces. The appropriate model constants determined in this work will allow for analysis of new alternate structure designs on the permeability of rapid prototyped synthetic bone structures.