No abstract

No abstract

No abstract

A new development in MIM aims at the manufacturing of parts out of two materials, the Two Components Injection Molding, which allows the production of parts with different materials in distinct locations, obtaining different properties in distinct regions of the part. In this work an austenitic stainless steel was combined with tool steel, based on the Two Components Injection Molding process, using dilatometric experiments to analyze the behaviour of materials during sintering. Metallographic analyses and tensile tests were made to verify the microstructure and the strength in the contact area of the two materials.

Explosion study in an iron powder reduction furnace was performed. Pressurized gaseous hydrogen was used as reductive atmosphere to convert iron powder in the interior of the furnace. Hydrogen was fed to the pre-chamber of the iron powder reduction furnace. The furnace was located inside a brick building. Explosion potential causes were determined by the fault tree technique. The impact effects to people, environment and materials were also analyzed by using Chem-Plus software. The consequences and vulnerability analyzes were performed considering a confined explosion inside the furnace pre-chamber, resulting from formation of a hydrogen cloud within the H2 explosion limits. The vent area criteria recommended by NFPA 68 to confined spaces were employed to the reduction furnace and to the vulnerability calculations; probit equations of the Eisenberg model were used. As results, safety measures to enhance safety on the reduction of iron powder operation inside the furnace installation were recommended.