No abstract

Eucalyptus nitens is a fast growing plantation species that has a good acclimation in Chile. It is commonly used for pulp and paper, but there is a growing market for solid wood products made from this species and an interest on producing high quality material. Thermal modification technology have been used to obtain high quality product out of fast growing plantation species. In this study we modified Eucalyptus nitens to analyse the influences of the process conditions and evaluated its mechanical properties under several process conditions. The material was modified in a closed system under elevated pressure and controlled relative humidity (30 and 100% relative humidity) at temperatures between 150 and 170°C, and in an open system with a standard thermal modification procedure between 160 and 230°C. Modulus of elasticity, modulus of rupture, deflection and work in bending (in elastic and inelastic proportions) and the resistance to impact milling in high energy multiple impact tests were determined. Mass loss after each modification was also measured and correlated with the mechanical properties. Anatomical properties of selected modifications were analysed. There were no significant differences between open and closed system modifications in both mechanical and anatomical properties.

Chemical degradation is an efficient method to obtain bio-oils and other compounds from lignin. Lignin bio-oils are potential substitutes for the phenol component of phenol formaldehyde (PF) resins. Here, we developed an analytical method based on high resolution mass spectrometry that provided structural information for the synthesized lignin-derived resins and supported the prediction of their properties. Different model resins based on typical lignin degradation products were analyzed by electrospray ionization in negative ionization mode. Utilizing enhanced mass defect filter techniques provided detailed structural information of the lignin-based model resins and readily complemented the analytical data from differential scanning calorimetry and thermogravimetric analysis. Relative reactivity and chemical diversity of the phenol substitutes were significant determinants of the outcome of the PF resin synthesis and thus controlled the areas of application of the resulting polymers. Graphical abstract ᅟ.

The goal of this study was to assess the suitability of a single mono-aromatic for substitution of petroleum-based phenol for phenol-formaldehyde (PF) resin synthesis and the usage of a new resin for wood treatment. After proper thermal decomposition of wood-based lignin, pyrolysis oil can be obtained. Due to the heterogeneity of the lignin macromolecule, oil contains large variety of organic-based compounds, mainly mono-aromatics, which are proposed to be used for replacement of phenol during PF resin synthesis. Therefore, for this purpose, nine of the most abundant mono-aromatic compounds in bio-oil were selected: ortho-, meta-, para-cresol, guaiacol, catechol, 4-methylcatechol, resorcinol, syringol, 4-ethylphenol and resol-type resin from each mono-aromatic were synthesized. Relevant features of the resin such as pH, viscosity, average molecular weight and curing behavior of resins using differential scanning calorimetry (DSC) were analyzed. Scots pine (Pinus sylvestris L.) sapwood samples were used to evaluate the suitability of resin for wood treatment in terms of dimensional stability and were compared with the PF resin-treated wood. From all tested resins, those made of guaiacol or ortho-, or meta-, or para-cresol and/or 4-ethylphenol proved to be suitable for wood treatment, whereas resins made of catechol or 4-methylguaiacol and syringol did not. Suitability of mono-aromatics for synthesis of resol-type resin depends on chemical structure, where the reactivity of the mono-aromatic (derivative of hydroxybenzene) is defined by the type, location and number of substituents.

In this study, the influence of dielectric barrier discharges at atmospheric pressure on maple sapwood was analyzed. Three common discharge types, a coplanar surface barrier discharge (CSBD), a direct dielectric barrier discharge and a jet discharge/remote plasma, were realized by the same electrodes and power supply. In general, plasma treatments are known to modify various surface properties leading to improved adhesion. For resins such as urea formaldehyde, the curing behavior is dependent on the pH. Therefore, the change of the surface pH value of maple is measured. As the main product of plasma-generated nitrogen oxides, the nitrate concentrations and consequently the nitric acid concentrations of the surfaces were determined. A significant pH reduction from about pH 5.6 to pH 4.6 was reached after a 30 s plasma treatment. An increase in the nitrate concentration over the plasma treatment duration was measured for all three discharges with a maximum of 6.6 mg/L for the CSBD, which corresponds to a concentration of 8.25 mg per m 2 wooden surface.