h i g h l i g h t sBoth approaches have potential to be applied in real-scale concrete structures. Use of encapsulated PU requires more preparation compared to the addition of SAPs. One approach is triggered through crack appearance the other by water ingress. SAPs resulted in the highest healing efficiency based on crack width measurements. Release of PU from the capsules and crack closure was clearly noticed from CT.

Development of suitable capsules is essential to achieve self-healing by encapsulation. In the context of self-healing concrete, capsules that can be easily mixed into concrete and release the healing agent when cracking occurs are ideally required. The optimization of these properties would allow for a successful implementation at large scale in practical (concrete) applications. In the present work, the suitability of polymeric cylindrical capsules made of poly(methyl methacrylate) (PMMA) to carry healing agent in self-healing concrete has been evaluated. An innovative method to assess more easily the capsules survival during concrete mixing was developed. This method is based on the evaluation of the setting behavior of concrete containing capsules filled with setting accelerator. Capsules with a wall thickness of 0.7 mm were able to resist the concrete mixing process and to rupture at relatively small crack widths (116 μm) after applying a surface treatment to increase the adhesion between the capsules and the cementitious matrix. Next, the self-healing efficiency of the encapsulation materials (glass or PMMA) was evaluated on real-scale concrete beams. The results showed that cracked concrete beams with mixed-in capsules (glass or PMMA) filled with waterrepellent agent showed higher resistance against chloride ingress compared to plain cracked concrete beams. PMMA capsules showed a lower self-healing efficiency (in relation to chloride ingress) compared to glass due to a less favorable distribution of the capsules in the concrete. However, concrete containing glass capsules is susceptible towards alkali-silica reaction.Although optimization of the PMMA capsules is still necessary to improve their distribution in concrete and achieve higher self-healing efficiency, the obtained results indicate that these capsules could be a promising solution towards self-healing concrete.

Polymeric capsules can have an advantage over glass capsules used up to now as proof-of-concept carriers in self-healing concrete. They allow easier processing and afford the possibility to fine tune their mechanical properties. Out of the multiple requirements for capsules used in this context, the capability of rupturing when crossed by a crack in concrete of a typical size is one of the most relevant, as without it no healing agent is released into the crack. This study assessed the fitness of five types of polymeric capsules to fulfill this requirement by using a numerical model to screen the best performing ones and verifying their fitness with experimental methods. Capsules made of a specific type of poly(methyl methacrylate) (PMMA) were considered fit for the intended application, rupturing at average crack sizes of 69 and 128 μm, respectively for a wall thickness of ~0.3 and ~0.7 mm. Thicker walls were considered unfit, as they ruptured for crack sizes much higher than 100 μm. Other types of PMMA used and polylactic acid were equally unfit for the same reason. There was overall good fitting between model output and experimental results and an elongation at break of 1.5% is recommended regarding polymers for this application.

No abstract