Trametes versicolor and Pleurotus ostreatus were used for the biopulping from pineapple leaf fiber (PALF). PALF substrate was subjected to T. versicolor for 2 to 6 weeks and to P. ostreatus for 4 to 8 weeks. The yields, holocellulose and lignin contents, and extractives in ethanol-toluene mixture and in sodium hydroxide (NaOH) solution were evaluated. Fourier transform infrared spectroscopy (FTIR) spectra, thermogravimetric analysis (TGA), and color studies by L*a*b* systems were used for sample analysis. The results showed that the pulp yield was 55% to 70% with P. ostreatus and 35% to 50% with T. versicolor. Longer colonization periods increased the amount of holocellulose and decreased the amount of lignin and extractives in ethanol-toluene and NaOH solution. TGA showed an increase in intensity associated with cellulose, and the observed inflexion was attributed to lignin, which showed a tendency to fade. The FTIR spectrum showed high intensity between 3100 cm -1 and 3600 cm -1(cellulose) and decreased intensity at 1730 cm -1 (lignin). For both fungi, the pulp color produced an increase in L* color parameter and decreased in yellowness, while little variation was observed in redness. The most appropriate colonization period was 5 weeks for P. ostreatus and 4 weeks for T. versicolor.
Aim of study: Plantations are threatened by an emerging disease called “Gmelina death disease”. The objective of this study was measured the incidence and severity of this disease and were correlated with the characteristics of the plantations, micro- and macronutrients in the soil and climatic parameters.Area of study: The present study evaluated 16 symptomatic fast-growth plantations of different age in Costa RicaMaterial and methods: Fungi were identified from xylem of infected trees. Incidence and severity was measured and correlated with the characteristics of the plantations, micro- and macronutrients in the soil and climatic parameters. Root condition and the quality (specify gravity, mechanical and decay resistance and chemical compositions), of the wood of symptomatic and asymptomatic trees were compared.Main results: Three fungal species (Chaetomella raphigera, Fusarium solani and Rhizomucor variabilis) were identified from diseased samples. Clay content in the soil profile from 10-20 cm deep explained a significant proportion of the variation in the incidence and severity of the disease, and stand density was related to severity. Although two climatic variables, Holdridge’s potential annual evapotranspiration and Thornthwaite’s potential evapotranspiration, showed a relationship between the incidence in the trees and symptoms of the disease. Infected wood turned black in symptomatic trees. Specify gravity and mechanical resistance of infected wood decreased, whereas its natural durability was unaffected. Changes were observed in the quantities of Mg, Fe, Ca, K and Zn in infected wood.Research highlights: Gmelina plantations established in sites with high stand densities and high contents of clay increase susceptibility to this disease.
The color of Tectona grandis wood is an attribute that favors its commercialization, however, wood color from fast-growth plantation trees is clear and lacks uniformity. The aim of this work is to characterize steamed teak wood by means of the Fourier transform infrared spectroscopy (FTIR) and [Formula: see text] color systems. Two moisture conditions (green and 50%) and two grain patterns (flat and quarter) of boards were analyzed through the application of different steaming times (0, 3, 6, 9, 12, 15 and 18[Formula: see text]h). The FTIR results showed that the bands at 1158, 1231, 1373 and 1419[Formula: see text]cm[Formula: see text] did not show any change with steaming, whereas the bands at 1053, 1108, 1453, 1506, 1536, 1558, 1595, 1652, 1683, 1700 and 1733[Formula: see text]cm[Formula: see text] presented a decrease in the intensity with the steaming time. The band at 1318[Formula: see text]cm[Formula: see text] was the only one that increased. Lightness ([Formula: see text]) was the most affected parameter, followed by yellowness ([Formula: see text]), while redness ([Formula: see text]) showed the smallest change. Surface color change ([Formula: see text]) presented the lowest value between 3[Formula: see text]h and 6[Formula: see text]h of steam-drying in the boards with flat grain, whereas for boards with quarter grain, the smallest [Formula: see text] value was obtained after 18[Formula: see text]h of steaming.
Los artículos publicados se distribuye bajo una Licencia Creative Commons Atribución 4.0 Internacional (CC BY 4.0) basada en una obra en http://www. revistas.una.ac.cr/ambientales., lo que implica la posibilidad de que los lectores puedan de forma gratuita descargar, almacenar, copiar y distribuir la versión final aprobada y publicada del artículo, siempre y cuando se mencione la fuente y autoría de la obra.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.