No abstract

Harmful benthic microalgae blooms represent an emergent phenomenon in temperate zones, causing health, ecological and economic concern. The main goal of this work was to compile records of Ostreopsis at large temporal and spatial scales, in order to study the relationship between cell abundances, the periodicity and intensity of the blooms and the role of sea water temperature in 14 Spanish, French, Monegasque and Italian sites located along the northern limits of the Mediterranean Sea. General trends were observed in the two considered basins: the north-western Mediterranean Sea, in which higher cell abundances were mostly recorded in mid-summer (end of July), and the northern Adriatic Sea where they occur in early fall (end of September). The sea-water temperature does not seem to be a primary driver, and the maximal abundance periods were site and year specific. Such results represent an important step in the understanding of harmful benthic microalgae blooms in temperate areas, and provide a good base for policy makers and managers in the attempt to monitor and forecast benthic harmful microalgae blooms.

No abstract

This experimental work is aimed at studying the effect of microstructural modifications induced by post-processing heat treatments on the corrosion behavior of silicon-aluminum alloys produced by means of laser powder bed fusion (LPBF). The manufacturing technique leads to microstructures characterized by the presence of melt pools, which are quite different compared to casting alloys. In this study, the behavior of an AlSi10Mg alloy was evaluated by means of intergranular corrosion tests according to ISO 11846 standard on heat-treated samples ranging from 200 to 500 °C as well as on untreated samples. We found that temperatures above 200 °C reduced microhardness of the alloy, and different corrosion morphologies occurred due to the modification of both size and distribution of silicon precipitates. Selective penetrating attacks occurred at melt pool borders. The intergranular corrosion phenomena were less intense for as-produced specimens without heat treatments compared to the heat-treated specimens at 200 and 300 °C. General corrosion morphologies were noticed for specimens heat treated at temperatures exceeding 400 °C.