Brewing is among the oldest biotechnological processes, in which barley malt and—to a lesser extent—wheat malt are used as conventional raw materials. Worldwide, 85–90% of beer production is now produced with adjuvants, with wide variations on different continents. This review proposes the use of two other cereals as raw materials in the manufacture of beer, corn and sorghum, highlighting the advantages it recommends in this regard and the disadvantages, so that they are removed in technological practice. The use of these cereals as adjuvants in brewing has been known for a long time. Recently, research has intensified regarding the use of these cereals (including in the malted form) to obtain new assortments of beer from 100% corn malt or 100% sorghum malt. There is also great interest in obtaining gluten-free beer assortments, new nonalcoholic or low-alcohol beer assortments, and beers with an increased shelf life, by complying with current food safety regulations, under which maize and sorghum can be used in manufacturing recipes.

Globally, beer is considered the most-consumed low-alcohol beverage, it ranks third, after water and tea, in the top sales of these drinks. New types of beer are the result of the influence of several factors, including innovations in science and technology, changing requirements for food consumption of the population, competition between producers, promotion of food for health, flavor, and quality, the limited nature of traditional food resource raw materials, and the interest of producers in reducing production costs. Manufacturers are looking for new solutions for obtaining products that meet the requirements of consumers, authentic products of superior quality, with distinctive taste and aroma. This review proposes the use of two pseudocereals as raw materials in the manufacture of beer: buckwheat and amaranth, focusing on the characteristics that recommend them in this regard. Due to their functional and nutraceutical properties, these pseudocereals can improve the quality of beer—a finished product. Additionally, all types of beer obtained from these pseudocereals are recommended for diets with particular nutritional requirements, especially gluten-free diets. Researchers and producers will continue to improve and optimize the sensory and technological properties of the new types of beer obtained from these pseudocereals.

The production of heavily hopped beers, such as Indian Pale Ale (IPA) styles, has been gaining momentum in recent years in the Central European markets. To this end, the dry hopping process is becoming increasingly popular, mostly in microbreweries, but also with larger manufacturers. In our research, we investigated the dissolution rate of the main volatile component of hops, β-myrcene with a modified dry hopping method. Following the primary fermentation, we applied the dry hopping process, where the weighed hops were chopped and blended into a container with 0.5 L of beer and later added to the young beer. During the dry hopping process, we determined various important parameters of the beer, and we repeated the same measurements for the bottled beer. In the first 96 h of the dry hopping process, we monitored the concentration of β-myrcene so that we managed to determine the dissolution rate constant (k = 0.1946 h−1). The β-myrcene concentration stabilizes after 44 h in the fermenter. At the same time, measurements were conducted for bitterness, pH, CO2 and alcohol content, extract and density during the process. Our experiment demonstrates that a new method of dry hopping provides a much higher concentration of β-myrcene (215 μg/L) than other methods indicated in former studies in the field. A health and safety assessment of β-myrcene was also made and we determined what the safe amount of β-myrcene ingested with IPA beer is. Our modified process was successful, we were able to determine the dissolution rate of β-myrcene, and the recommended daily intake of IPA beer with particular reference to β-myrcene.

No abstract

One of the earliest biotechnological processes is brewing, which uses conventional raw materials like barley malt and, to a lesser extent, wheat malt. Today, adjuncts are used in the brewing of 85–90% of the world’s beer, with significant regional differences. The results of this study’s brewing were compared to those of beer made only from malted barley. Malted and unmalted sorghum were suggested for use in this study’s brewing. In order to improve the technical mashing operation and raise output yield, commercial enzymes were introduced. The following physicochemical analyses of the finished beer were carried out in accordance with regulatory requirements: original extract (% m/m), apparent extract (% m/m), alcohol content (% v/v, % m/m), density (g/cm3), turbidity (EBC), pH, color (EBC), bitterness value (IBU), oxygen content (mg/L), carbon dioxide content (g/L). A nine-point hedonic scale was used to conduct the sensory evaluation of the beer samples. Sorghum was easily included into the technological process to create a finished product that, in many ways, resembled traditional beer, making sorghum appropriate for typical beer drinkers. The laboratory brewing formula that produced the highest-quality results of all the tested variants included 60% sorghum malt and 40% unmalted sorghum: original extract 11.26% m/m, apparent extract 4.59% m/m, alcohol content 4.12% v/v, turbidity 0.74 EBC, CO2 content 5.10 g/L. The resulting sorghum beer typically has low alcohol content, a complex, aromatic, slightly sour flavor, a mild bitter or astringent sensation, and less stable foam.