Hydrothermal carbonization (HTC) is a novel thermal conversion process that can be used to convert municipal waste streams into sterilized, value-added hydrochar. HTC has been mostly applied and studied on a limited number of feedstocks, ranging from pure substances to slightly more complex biomass such as wood, with an emphasis on nanostructure generation. There has been little work exploring the carbonization of complex waste streams or of utilizing HTC as a sustainable waste management technique. The objectives of this study were to evaluate the environmental implications associated with the carbonization of representative municipal waste streams (including gas and liquid products), to evaluate the physical, chemical, and thermal properties of the produced hydrochar, and to determine carbonization energetics associated with each waste stream. Results from batch carbonization experiments indicate 49-75% of the initially present carbon is retained within the char, while 20-37% and 2-11% of the carbon is transferred to the liquid- and gas-phases, respectively. The composition of the produced hydrochar suggests both dehydration and decarboxylation occur during carbonization, resulting in structures with high aromaticities. Process energetics suggest feedstock carbonization is exothermic.

This review paper reports the consensus of a technical workshop hosted by the European network, NanoImpactNet (NIN). The workshop aimed to review the collective experience of working at the bench with manufactured nanomaterials (MNMs), and to recommend modifications to existing experimental methods and OECD protocols. Current procedures for cleaning glassware are appropriate for most MNMs, although interference with electrodes may occur. Maintaining exposure is more difficult with MNMs compared to conventional chemicals. A metal salt control is recommended for experiments with metallic MNMs that may release free metal ions. Dispersing agents should be avoided, but if they must be used, then natural or synthetic dispersing agents are possible, and dispersion controls essential. Time constraints and technology gaps indicate that full characterisation of test media during ecotoxicity tests is currently not practical. Details of electron microscopy, dark-field microscopy, a range of spectroscopic methods (EDX, XRD, XANES, EXAFS), light scattering techniques (DLS, SLS) and chromatography are discussed. The development of user-friendly software to predict particle behaviour in test media according to DLVO theory is in progress, and simple optical methods are available to estimate the settling behaviour of suspensions during experiments. However, for soil matrices such simple approaches may not be applicable. Alternatively, a Critical Body Residue approach may be taken in which body concentrations in organisms are related to effects, and toxicity thresholds derived. For microbial assays, the cell wall is a formidable barrier to MNMs and end points that rely on the test substance penetrating the cell may be insensitive. Instead assays based on the cell envelope should be developed for MNMs. In algal growth tests, the abiotic factors that promote particle aggregation in the media (e.g. ionic strength) are also important in providing nutrients, and manipulation of the media to control the dispersion may also inhibit growth. Controls to quantify shading effects, and precise details of lighting regimes, shaking or mixing should be reported in algal tests. Photosynthesis may be more sensitive than traditional growth end points for algae and plants. Tests with invertebrates should consider non-chemical toxicity from particle adherence to the organisms. The use of semi-static exposure methods with fish can reduce the logistical issues of waste water disposal and facilitate aspects of animal husbandry relevant to MMNs. There are concerns that the existing bioaccumulation tests are conceptually flawed for MNMs and that new test(s) are required. In vitro testing strategies, as exemplified by genotoxicity assays, can be modified for MNMs, but the risk of false negatives in some assays is highlighted. In conclusion, most protocols will require some modifications and recommendations are made to aid the researcher at the bench.

Carbon nanotubes (NTs) may be among the most useful engineered nanomaterials for structural applications but could be difficult to study in ecotoxicological evaluations using existing tools relative to nanomaterials with a lower aspect ratio. Whereas the hydrophobicity and van der Waals interactions of NTs may suggest aggregation and sedimentation in aquatic systems, consideration regarding how engineered surface modifications influence their environmental fate and toxicology is needed. Surface modifications (e.g., functional groups and coatings) are intended to create conditions to make NTs dispersible in aqueous suspension, as required for some applications. In the present study, column stability and settling experiments indicated that raw, multiwalled NTs (MWNTs) settled more rapidly than carbon black and activated carbon particles, suggesting sediment as the ultimate repository. The presence of functional groups, however, slowed the settling of MWNTs (increasing order of stability: hydroxyl > carboxyl > raw), especially in combination with natural organic matter (NOM). Stabilized MWNTs in high concentrations of NOM provided relevance for water transport and toxicity studies. Aqueous exposures to raw MWNTs decreased Ceriodaphnia dubia viability, but such effects were not observed during exposure to functionalized MWNTs (> 80 mg/L). Sediment exposures of the amphipods Leptocheirus plumulosus and Hyalella azteca to different sizes of sediment-borne carbon particles at high concentration indicated mortality increased as particle size decreased, although raw MWNTs induced lower mortality (median lethal concentration [LC50], 50 to >264 g/kg) than carbon black (LC50, 18-40 g/kg) and activated carbon (LC50, 12-29 g/kg). Our findings stress that it may be inappropriate to classify all NTs into one category in terms of their environmental regulation.