Novel polyethylene oxide (PEO) hydrogel films were synthesized via UV crosslinking with varying concentrations of pentaerythritol tetra-acrylate (PETRA) as crosslinking agent. The aim was to study the effects of the crosslinking agent on the material properties of hydrogel films intended for dermatological applications. Fabricated film samples were characterized using swelling studies, scanning electron microscopy, tensile testing and rheometry. Films showed rapid swelling and high elasticity. The increase of PETRA concentration resulted in significant increase in the gel fraction and crosslinking density (ρc), while causing a significant decrease in the equilibrium water content (EWC), average molecular weight between crosslinks (trueM¯normalc), and mesh size (ζ) of films. From the scanning electron microscopy, cross-linked PEO hydrogel network appeared as cross-linked mesh-like structure with interconnected micropores. Rheological studies showed PEO films required a minimum of 2.5% w/w PETRA to form stable viscoelastic solid gels. Preliminary studies concluded that a minimum of 2.5% w/w PETRA is required to yield films with desirable properties for skin application.

Electroactive hydrogels can be used to influence cell response and maturation by electrical stimulation. However, hydrogel formulations which are 3D printable, electroactive, cytocompatible, and allow cell adhesion, remain a challenge in the design of such stimuli‐responsive biomaterials for tissue engineering. Here, a combination of pyrrole with a high gelatin‐content oxidized alginate‐gelatin (ADA‐GEL) hydrogel is reported, offering 3D‐printability of hydrogel precursors to prepare cytocompatible and electrically conductive hydrogel scaffolds. By oxidation of pyrrole, electroactive polypyrrole:polystyrenesulfonate (PPy:PSS) is synthesized inside the ADA‐GEL matrix. The hydrogels are assessed regarding their electrical/mechanical properties, 3D‐printability, and cytocompatibility. It is possible to prepare open‐porous scaffolds via bioplotting which are electrically conductive and have a higher cell seeding efficiency in scaffold depth in comparison to flat 2D hydrogels, which is confirmed via multiphoton fluorescence microscopy. The formation of an interpenetrating polypyrrole matrix in the hydrogel matrix increases the conductivity and stiffness of the hydrogels, maintaining the capacity of the gels to promote cell adhesion and proliferation. The results demonstrate that a 3D‐printable ADA‐GEL can be rendered conductive (ADA‐GEL‐PPy:PSS), and that such hydrogel formulations have promise for cell therapies, in vitro cell culture, and electrical‐stimulation assisted tissue engineering.

are of a similar order of size, larger particles overtake the smaller so that ultimately a size distribution is formed. Thus, although each individual particle alternately lifts and falls, there is this constant classification effect, other than where there is circulation. Stevenage, Hefts. (England)

The development of stimuli‐responsive drug delivery systems offers significant opportunities for innovations in industry. It is possible to produce polymer‐based drug delivery devices enabling spatiotemporal control of the release of the drug triggered by an electrical stimulus. Here we describe the development of a wireless controller for drug delivery from conductive/electroactive polymer‐based biomaterials and demonstrate its function in vitro. The wireless polymer conduction controller device uses very low power, operating at 2.4 GHz, and has a supply voltage controller circuit which controls electrical stimulation voltage levels. The computer graphical user interface program communicates with the controller device, and it receives device information, device status and temperature data from the controller device. The prototype of the wireless controller system can trigger the delivery of a drug, dexamethasone phosphate, from a matrix of degradable electroactive polymers. Furthermore, we introduce the application of in silico toxicity screening as a potentially useful method to facilitate the design of non‐toxic degradable electroactive polymers for a multitude of biotechnological applications, addressing one of the key commercial challenges to biomaterial development, in accordance with ‘safe by design’ principles. © 2020 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.

No abstract