We present novel results obtained in the fabrication of high-aspect ratio micro-fluidic microstructures chemically etched from fused silica substrates locally exposed to femtosecond laser radiation. A volume sampling method to generate three-dimensional patterns is proposed and a systematic SEM-based analysis of the microstructure is presented. The results obtained gives new insights toward a better understanding of the femtosecond laser interaction with fused silica glass (a-SiO(2)).
Effective methods for manipulating, isolating and sorting cells and particles are essential for the development of microfluidic-based life science research and diagnostic platforms. We demonstrate an integrated optical platform for cell and particle sorting in microfluidic structures. Fluorescentdyed particles are excited using an integrated optical waveguide network within micro-channels. A diode-bar optical trapping scheme guides the particles across the waveguide/micro-channel structures and selectively sorts particles based upon their fluorescent signature. This integrated detection and separation approach streamlines microfluidic cell sorting and minimizes the optical and feedback complexity commonly associated with extant platforms.
Low energy femtosecond laser pulses locally increase the refractive index and the hydro-fluoric acid etching rate of fused silica. These phenomena form the basis of a direct-write method to fabricate integrated glass devices that are of particular interest for optofluidics and optomechanical applications. Yet the underlying physical mechanism behind these effects remains elusive, especially the role of the laser polarization. Using Scanning Thermal Microscope and Raman spectrometer we observe in laser affected zones, a localized sharp decrease of the thermal conductivity correlated with an increased presence of low-number SiO 2 cycles. In addition, we find that a high correlation exists between the amount of structural changes and the decrease of thermal conductivity. Furthermore, sub-wavelength periodic patterns are detected for high peak power exposures. Finally, our findings indicate that, to date, the localized densification induced by femtosecond laser pulses remains well below the theoretical value achievable in mechanically densified silica.
Bellouard, Y.J.; Colomb, T.; Depeursinge, C.; Dugan, M.; Said, A.A.; Bado, P. Please check the document version of this publication:• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers.
Link to publication
Citation for published version (APA):Bellouard, Y. J., Colomb, T., Depeursinge, C., Dugan, M., Said, A. A., & Bado, P. (2006). Nanoindentation and birefringence measurements on fused silica specimen exposed to low-energy femtosecond pulses. Optics Express, 14(18), 8360-8366. DOI: 10.1364/OE.14.008360
General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research.• You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal ?
Take down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Abstract: Femtosecond laser pulses used in a regime below the ablation threshold have two noticeable effects on Fused Silica (a-SiO2): they locally increase the material refractive index and modify its HF etching selectivity. The nature of the structural changes induced by femtosecond laser pulses in fused silica is not fully understood. In this paper, we report on nanoindentation and birefringence measurements on fused silica exposed to low-energy femtosecond laser pulses. Our findings further back the hypothesis of localized densification effect even at low energy regime.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.