Arc behaviour is a significant factor in all arc welding processes. Understanding of arc types and their inherent properties can help enhance weld prediction and weld quality and reduce welding cost and production cycle time. Advanced welding processes utilize real-time control and prediction, increasing the need for detailed knowledge of arc characteristics and arc applications. This paper analyses the types of welding arcs used in the welding industry, explains corresponding features and characteristics, provides guidance for suitable applications, and presents arc type comparisons, benefits, and weaknesses. The study is based on a review of the literature, and it provides a comprehensive overview of arc phenomena. The results of this work show that in many applications, greater benefit accrues from spray and pulsed arcs than short and globular arc modes. Controlled short arc, heavy deposition rate arc, and controlled spray arc are enhanced arc processes offering significant improvements in efficiency and usability. This review can assist companies in making appropriate choices of arc and welding process for different materials and applications. Furthermore, it can be utilized as a basis for further research.

The ongoing need to reduce the weight of products while increasing strength has resulted in new generation steel manufacturing using special heat treatments to produce High Strength Steels (HSS) and Ultra High Strength Steels (UHSS) with up to 1700 MPa tensile strength. The high strength level of these steels makes it possible to produce structures with a considerable weight and cost reduction, and such steels have been adopted in the automotive industry and for mobile heavy equipment. Welding of UHSS is, however, not without its complications and welding processes for these steels need careful attention. For instance, their high susceptibility to cracking and Heat Affected Zone (HAZ) softening are risks that need to be borne in mind when choosing welding parameters. This research work discusses the difficulties and challenges of successful welding of UHSS. Common welding methods used in welding of UHSS are briefly reviewed to gain a better understanding of the effects of different welding parameters and methods. The paper finds that UHSS can be satisfactorily welded with laser welding, electron beam welding, resistance welding, and conventional arc welding methods, but the quality of the weld is dependent on appropriate control of several parameters and variables of the welding processes.

• Patient doses in interventional radiology are high and vary greatly • Better standardisation of procedures and techniques is needed to improve practice • Dose reference levels for most common procedures are proposed.

Experiments were carried out to determine the properties of the welded joints in 8 mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength 821-835 MPa). The dependence of the strength, elongation, hardness, impact energy and crack opening displacement on the heat input in the range 1.0 -0.7 kJ mm 21 was determined. The results show that the dependence of the strength of the welded joints decreases and that of the elongation increases. The heat input has only a slight effect on the impact energy and crack opening displacement in the heat-affected zone.

No abstract