Poly (methyl methacrylate) (PMMA) is a thermoplastic synthetic polymer, which displays superior characteristics such as transparency, good tensile strength, and processability. Its performance can be improved by surface engineering via the use of functionalized thin film coatings, resulting in its versatility across a host of applications including, energy harvesting, dielectric layers and water purification. Modification of the PMMA surface can be achieved by atomic layer deposition (ALD), a vapor-phase, chemical deposition technique, which permits atomic-level control. However, PMMA presents a challenge for ALD due to its lack of active surface sites, necessary for gas precursor reaction, nucleation, and subsequent growth. The purpose of this review is to discuss the research related to the employment of PMMA as either a substrate, support, or masking layer over a range of ALD thin film growth techniques, namely, thermal, plasma-enhanced, and area-selective atomic layer deposition. It also highlights applications in the selected fields of flexible electronics, biomaterials, sensing, and photocatalysis, and underscores relevant characterization techniques. Further, it concludes with a prospective view of the role of ALD in PMMA processing.

Essential oils (EOs) are complex mixtures of volatile compounds extracted from different parts of plants by different methods. There is a large diversity of these natural substances with varying properties that lead to their common use in several areas. The agrochemical, pharmaceutical, medical, food, and textile industry, as well as cosmetic and hygiene applications are some of the areas where EOs are widely included. To overcome the limitation of EOs being highly volatile and reactive, microencapsulation has become one of the preferred methods to retain and control these compounds. This review explores the techniques for extracting essential oils from aromatic plant matter. Microencapsulation strategies and the available technologies are also reviewed, along with an in-depth overview of the current research and application of microencapsulated EOs.

No abstract

Environmentally friendly alternatives have become sought after upon the development of scientific research and industrial processes. Recent trends suggest biodegradable polymers as the most promising solution for synthetic microcapsule systems. Safety, efficiency, biocompatibility, and biodegradability are some of the properties that biodegradable systems in microencapsulation can provide for a broad spectrum of applications. The controlled release of encapsulated active agents is a research field that, over the years, has been constantly innovating due to the promising applications in the areas of pharmaceutical, cosmetic, textile industry, among others. This article presents an overview of different polymers with potential for microcapsule synthesis, namely, biodegradable polymers. First, natural polymers are discussed, which are divided into two categories: polysaccharide-based polymers (cellulose, starch, chitosan, and alginate) and protein polymers (gelatin). Second, synthetic polymers are described, where biodegradable polymers such as polyesters, polyamides, among others appear as examples. For each polymer, this review presents its origin, relevant properties, applications, and examples found in the literature regarding its use in biodegradable microencapsulation systems.

This study investigates the functionalization of titanium dioxide nanoparticles on the surface of polymeric microcapsules as a mean to control the release of encapsulated citronella through solar radiation. This allows for the release of a mosquito repellent without human intervention, as the sunlight works as a release activator. The TiO 2 nanoparticles were synthetized using a modified sol-gel and hydrothermal method, with a crystallite size of the order of 10 nm and a specific surface area >250 m 2 /g. Transmission electron microscopy observations enabled the confirmation of the mesoporous structure. The nitrogen doping effect and changes in pH (pH = 3, 6 and 9) of the precursor solution was studied from photocatalytic and photoluminescence experiments. Polyurethane microcapsules were prepared using a modified interfacial polymerization method. The surface topography of the microcapsules was observed with scanning electron microscopy, while the release efficiency was quantified using gas chromatography coupled with mass spectroscopy. In-vitro bioassays using live mosquitoes further attested the controlled release repellence effect of these photocatalytic microcapsules by inhibition of these vectors. The results showed that functionalizing the microcapsules with nanoparticles on their surface and then exposing them to ultraviolet radiation effectively increased the output of citronella into the air, repelling the mosquitoes.