The ability to accurately determine metal mercury content and identify different mercury species in solid samples is essential for developing remediation and control strategies. The aim of the present study is to characterize mercury compounds based on thermal desorption. For this purpose a series of samples was prepared and the operational parameters-heating velocity, carrier gas-were optimized. Fifteen commercial mercury compounds were analyzed for use as fingerprints. The results of the study show that the identification of mercury species by the method of thermal desorption is possible. The temperature of desorption increased according to the following order HgI2

Carbon dioxide (CO 2 ) utilization alternatives for manufacturing formic acid (FA) such as electrochemical reduction (ER) or homogeneous catalysis of CO 2 and H 2 could be efficient options for developing more environmentally-friendly production alternatives to FA fossil-dependant production. However, these alternatives are currently found at different technological readiness levels (TRLs), and some remaining technical challenges need to be overcome to achieve at least carbon-even FA compared to the commercial process, especially ER of CO 2 , which is still farther from its industrial application. The main technical limitations inherited by FA production by ER are the low FA concentration achieved and the high overpotentials required, which involve high consumptions of energy (ER cell) and steam (distillation). In this study, a comparison in terms of carbon footprints (CF) using the Life Cycle Assessment (LCA) tool was done to evaluate the potential technological challenges assuring the environmental competitiveness of the FA production by ER of CO 2 . The CF of the FA conventional production were used as a benchmark, as well as the CF of a simulated plant based on homogeneous catalysts of CO 2 and H 2 (found closer to be commercial). Renewable energy utilization as PV solar for the reaction is essential to achieve a carbon-even product; however, the CF benefits are still negligible due to the enormous contribution of the steam produced by natural gas (purification stage). Some ER reactor configurations, plus a recirculation mode, could achieve an even CF versus commercial process. It was demonstrated that the ER alternatives could lead to lower natural resources consumption (mainly, natural gas and heavy fuel oil) compared to the commercial process, which is a noticeable advantage in environmental sustainability terms.

No abstract

Low carbon options for the chemical industry include switching from fossil to renewable energy, adopting new low-carbon production processes, along with retrofitting current plants with carbon capture for ulterior use (CCU technologies) or storage (CCS). In this paper, we combine a dynamic Life Cycle Assessment (d-LCA) with economic analysis to explore a potential transition to low-carbon manufacture of formic acid. We propose new methods to enable early technical, environmental and economic assessment of formic acid manufacture by electrochemical reduction of CO2 (CCU), and compare this production route to the conventional synthesis pathways and to storing CO2 in geological storage (CCS). Both CCU and CCS reduce carbon emissions in particular scenarios, although the uncertainty in results suggests that further research and scale-up validation are needed to clarify the relative emission reduction compared to conventional process pathways. There are trade-offs between resource security, cost and emissions between CCU and CCS systems. As expected, the CCS technology yields greater reductions in CO2 emissions than the CCU scenarios and the conventional processes. However, compared to CCS systems, CCU has better economic potential and lower fossil consumption, especially when powered by renewable electricity. The integration of renewable energy in the chemical industry has an important climate mitigation role, especially for processes with high electrical and thermal energy demands. of CO2 for CCS and/or CCU applications in the future, if the power sector was to become 1 fully decarbonised (Mathy et al. 2018;McDowall et al. 2018). Furthermore, CCU could 2 be critical in the near-term to support the development of early CCS infrastructure. In this 3 overall context, a debate has arisen around the relative benefits of CCU and CCS, 4 introducing divergent perspectives about the role of CO2 utilization compared to storage 5 in mitigating climate change. Some studies have chosen to group them as carbon capture 6 and storage or utilisation (CCUS) (BEIS, 2018).

The speciation of mercury is currently attracting widespread interest because the emission, transport, deposition and behaviour of toxic mercury species depend on its chemical form. The identification of these species in low concentrations is no easy task and it is even more complex in coal combustion products due to the fact that these products contain organic and mineral matter that give rise to broad peaks and make it difficult to carry out qualitative and quantitative analysis. In this work, a solution to this problem is proposed using a method based on thermal desorption. A sequential extraction procedure was employed for the comparison and validation of the method developed. Samples of fly ashes and soils were analyzed by both of these methods, and thermal desorption was found to be an appropriate technique for mercury speciation. Even in the case of low mercury contents, recovery percentages were close to 100%. The main mercury species identified in the samples studied were HgS and, to a lesser extent, HgO and HgSO4. In addition, although the presence of mercury complexes cannot be demonstrated, the desorption behaviour and sequential extraction results suggest that this element might be associated with the mineral matrix or with carbon particles in some of the solids.