Abstract:We present an ultrafast thin disk laser that generates an average output power of 275 W, which is higher than any other modelocked laser oscillator. It is based on the gain material Yb:YAG and operates at a pulse duration of 583 fs and a repetition rate of 16.3 MHz resulting in a pulse energy of 16.9 μJ and a peak power of 25.6 MW. A SESAM designed for high damage threshold initiated and stabilized soliton modelocking. We reduced the nonlinearity of the atmosphere inside the cavity by several orders of magnitude by operating the oscillator in a vacuum environment. Thus soliton modelocking was achieved at moderate amounts of self-phase modulation and negative group delay dispersion. Our approach opens a new avenue for power scaling femtosecond oscillators to the kW level. 435-453 (1996). 19201-19208 (2010). Huber, and U. Keller, "High-power ultrafast thin disk laser oscillators and their potential for sub-100-femtosecond pulse generation," Appl. Published in OpticsExpress 20, issue 21, 23535-23541, 2012 which should be used for any reference to this

We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin-disk laser generating 80 μJ of pulse energy without additional amplification. This laser oscillator operates at a repetition rate of 3.03 MHz and delivers up to 242 W of average output power with a pulse duration of 1.07 ps, resulting in an output peak power of 66 MW. In order to minimize the parasitic nonlinearity of the air inside the laser cavity, the oscillator was operated in a vacuum environment. To start and stabilize soliton mode locking, we used an optimized high-damage threshold, low-loss SESAM. With this new milestone result, we have successfully scaled the pulse energy of ultrafast laser oscillators to a new performance regime and can predict that pulse energies of several hundreds of microjoules will become possible in the near future. Such lasers are interesting for both industrial and scientific applications, for example for precise micromachining and attosecond science.

No abstract

Microactuators are an essential component in microsystems or microdevices, and in applications that include artificial muscles, pumps, valves, or switchers. Liquid‐crystalline elastomers are a new class of actuator material in the field of microsystem technologies, which can be used in standard processes. This newly developed actuator provides new possibilities in microfluidics because of its dimensional changes activated by the increase in temperature.

Silicon refractive planar parabolic lenses with minimized absorption were fabricated by a combination of photolithography and dry-etching techniques. Focusing and spectral properties of the lenses were studied with synchrotron radiation in the energy range 8–25 keV at the European Synchrotron Radiation Facility. A focal spot of 1.8 μm with a gain of 18.5 and transmission of more then 80% was measured at 15.6 keV. The spectral characteristics were analyzed taking into account material dispersion and photon-energy attenuation in the hard x-ray range.