© iForest -Biogeosciences and Forestry IntroductionThe entry of forestry machineries into forest has resulted in some cases in levels of soil disturbance that may have adverse effects on forest ecosystems and subsequently on long-term tree growth (Miller & Anderson 2002, Landsberg et al. 2003, Ilstedta et al. 2004, Murphy et al. 2004. Numerous studies have documented changes in physical soil properties following harvesting machine traffic, such as increased soil compaction, soil displacement, rutting and soil profile disturbances (Adams & Froehlich 1984, Wronski & Murphy 1994, Rab 1996, Rohand et al. 2004, Eliasson 2005, Susnjar et al. 2006, Eliasson & Wasterlund 2007, Horn et al. 2007, Wang et al. 2007, Zenner et al. 2007, Ampoorter et al. 2010, 2012, Picchio et al. 2012. For instance, soil compaction, in which soil pores (especially macropores) are destroyed and surface aggregates are broken down (Ampoorter et al. 2010), depend on the soil texture and moisture at the time of harvest (McNabb et al. 2001, Bock & Van Rees 2002, but also on the number of machines passing on a specific point. Generally, soil compaction occurs in the first ten passes of a vehicle, but most of the compaction occurs in the first three trips; subsequent passes generally have little additional effect (Gayoso & Iroume 1991, Eliasson 2005, Eliasson & Wasterlund 2007, Ampoorter et al. 2010. So it would be appropriate to concentrate machine traffic on carefully designed skid trails in such a way to minimize the affected area and leave most trees undisturbed (Zenner & Berger 2008, Ampoorter et al. 2010.It is unclear, however, to what extent the slope gradient (i.e., longitudinal and transversal slope) of the skid trail and the direction of machine traffic (i.e., uphill vs. downhill) could modify the impacts of vehicle traffic on the soil. Whereas some studies have failed to document an effect of slope on bulk density following harvesting traffic (e.g., Sidle & Drlica 1981, Jamshidi et al. 2008, others have shown that soil disturbances increase with slope gradient (Ezzati et al. 2012), possibly because machines slip more and remain in a given place for a longer time on steep terrain, causing soil pulling and dragging (Gayoso & Iroume 1991). Thus, steepness may have an even stronger effect on soil disturbance than that of the soil moisture (Krag et al. 1986), but possibly less so than that of the traffic intensity (Ezzati et al. 2012).Soil disturbance is also strongly affected by the type of harvesting equipment used. Small-scale harvesting technology, such as farm tractors or better small skidder or other specific machines (such as ATV), is thought to result in lower levels of residual stand and soil damage because the equipment is typically smaller and lighter than regular skidders (Updegraff & Blinn 2000, Savelli et al. 2010, Spinelli & Magagnotti 2012. A recent study dealing with soil compaction has found that the highest relative increase in bulk density was associated with the use of bulldozers, the lowest with the use of a forwarder, a...
Aim of study: The study was conducted to examine impact of skidding traffic, trail slope, traffic frequency, and soil depth on the soil bulk density.Area of study: This study was carried out in the Kheyrud Forest in Hyrcanian forest, Iran. Material and methods:The level of soil compaction at eight levels of traffic (1, 4, 8, 10, 15, 20, 25, and 30 passes), four levels of skid trail slopes (0, 10, -10, and -20%) and three soil depth (5, 15, 25 cm) were applied in three replicates consequently. Bulk densities were measured on the undisturbed surface (control) and within the tracks. Timbers were extracted in the tree-length logging method using rubber-tired skidder (Timberjack 450 C).Main results: About 5.2% of total area of harvesting unit were disturbed and compacted. Uphill skidding increases compaction more than downhill skidding. In the four different slopes, the highest increasing of the bulk density was occurred during the first few passes of skidder, although the bulk density continued to increase in amount and depth with the number of passes. The increases in bulk density were still important at the maximum sampling depth of 20-30 cm.Research highlights: The results indicated that slope steepness had a strong effect on the soil physical properties and soil disturbance. Designated skid trails should be used to minimize the influence on the forest soil.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.